VND10B
| Parameters | |
|---|---|
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | Pentawatt-5 (Vertical, Bent and Staggered Leads) |
| Number of Pins | 5 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Feature | Status Flag |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 7 |
| Termination | Solder |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Terminal Position | ZIG-ZAG |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 13V |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | VND10 |
| Pin Count | 7 |
| JESD-30 Code | R-PZFM-T7 |
| Number of Outputs | 2 |
| Qualification Status | Not Qualified |
| Output Type | N-Channel |
| Max Output Current | 3.4A |
| Supply Voltage-Min (Vsup) | 6V |
| Interface | On/Off |
| Nominal Supply Current | 35μA |
| Output Configuration | High Side |
| Power Dissipation | 75W |
| Output Current | 14A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 6V~26V |
| Fault Protection | Open Load Detect, Over Temperature |
| Input Current | 10mA |
| Load Current | 14A |
| Output Peak Current Limit-Nom | 3.4A |
| Rds On (Typ) | 100m Ω (Max) |
| Built-in Protections | TRANSIENT; THERMAL; UNDER VOLTAGE |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
VND10B Overview
A Tube is used to package it.This file is included in package Pentawatt-5 (Vertical, Bent and Staggered Leads).The mounting type of the LED driver is Through Hole.There is a General Purpose switch type associated with it.It is recommended that the temperature be set to -40°C~150°C TJ for reliable performance.The LED driver has a total of 2 outputs.The LED driving board operates with a supply voltage of Not Required.A maximum voltage of N-Channel volts is available from the output of this LED driver.The lighting driver has Status Flag features.It belongs to the family VND10.The termination count is 7.During operation, the 5 pins are used.The LED driving board has a total of 1 functions.The maximum output current must drop to 3.4A to meet the operation criteria.High efficiency is possible when the supply voltage is set to 13V.Through Hole is mounted in the way of this LED driving board.A total of 7 pins are included in this LED driver.As a result, the output current is set to 14A.For normal operation, the supply voltage (Vsup) must be kept above 6V.
VND10B Features
Supplied from 13V
VND10B Applications
There are a lot of STMicroelectronics VND10B Power Switches ICs applications.
- USB Power Distribution
- Smartphone and PDA
- Smart Phones, Feature Phones
- Portable Music Players
- Portable GPS Device
- Portable Video Game Players
- Portable Devices
- Low Voltage I/O System Power
- HDD, SSD
- Storage Drives
