VND10B-E
| Parameters | |
|---|---|
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | Pentawatt-5 (Vertical, Bent and Staggered Leads) |
| Number of Pins | 5 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Feature | Status Flag |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Max Power Dissipation | 75W |
| Base Part Number | VND10 |
| Number of Outputs | 2 |
| Output Type | N-Channel |
| Max Output Current | 3.4A |
| Interface | On/Off |
| Nominal Supply Current | 35μA |
| Output Configuration | High Side |
| Power Dissipation | 75W |
| Output Current | 14A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 6V~26V |
| Fault Protection | Open Load Detect, Over Temperature |
| Rds On (Typ) | 100m Ω (Max) |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
VND10B-E Overview
A Tube is used to package it.There is a package for it in the Pentawatt-5 (Vertical, Bent and Staggered Leads) package.The LED driver is mounted as Through Hole.The switch type of this switch is General Purpose.In order to guarantee reliable performance, the temperature should be set to -40°C~150°C TJ.By default, it is set to output 2.It uses a supply voltage of Not Required to operate.It has a maximum output voltage of N-Channel volts.Features of the lighting driver are Status Flag.The VND10 family consists of this type.For operation, 5 pins are used.The maximum output current drops to 3.4A in order to meet the operation criteria.The LED driving board is mounted in the way of Through Hole.In this case, the output current will be set to 14A.
VND10B-E Features
VND10B-E Applications
There are a lot of STMicroelectronics VND10B-E Power Switches ICs applications.
- Hot Swaps
- PDAs
- Hard Disk Drives
- Solid-State Drives
- Wearable Devices
- Smart Phones, Feature Phones
- Notebook and Tablet Computers
- Set-Top Boxes
- Hot Swap
- HDD, SSD
