VND10B(011Y)
| Parameters | |
|---|---|
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | Pentawatt-5 (Horizontal, Bent and Staggered Leads) |
| Number of Pins | 5 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| JESD-609 Code | e0 |
| Feature | Status Flag |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 7 |
| ECCN Code | EAR99 |
| Resistance | 100mOhm |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Subcategory | Peripheral Drivers |
| Max Power Dissipation | 75W |
| Terminal Position | ZIG-ZAG |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 13V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | VND10 |
| Pin Count | 7 |
| JESD-30 Code | R-PZFM-T7 |
| Number of Outputs | 2 |
| Qualification Status | Not Qualified |
| Output Type | N-Channel |
| Max Output Current | 3.4A |
| Power Supplies | 8/16V |
| Supply Voltage-Min (Vsup) | 6V |
| Interface | On/Off |
| Nominal Supply Current | 35μA |
| Output Configuration | High Side |
| Power Dissipation | 75W |
| Output Current | 14A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Max Supply Current | 35μA |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 6V~26V |
| Driver Number of Bits | 2 |
| Fault Protection | Open Load Detect, Over Temperature |
| Output Peak Current Limit-Nom | 3.4A |
| Rds On (Typ) | 100m Ω (Max) |
| Built-in Protections | TRANSIENT; THERMAL; UNDER VOLTAGE |
| RoHS Status | ROHS3 Compliant |
VND10B(011Y) Overview
As you can see, it's packaged in the way of a Tube.It is included in the package Pentawatt-5 (Horizontal, Bent and Staggered Leads).This lighting drivere has a mounting type of Through Hole.General Purpose is the switch type that it owns.To ensure reliable operation, set the temperature to -40°C~150°C TJ.The LED driver has a total of 2 outputs.With a supply voltage of Not Required, the LED driving board operates.The maximum output voltage is N-Channel volts.It is equipped with Status Flag features.I believe it belongs to the VND10 family.A total of 7 terminations can be found in it.The 5 pins are used for the operation of the system.Currently, the lighting driver has a total of 1 functions.To meet the operation criteria, the maximum output current drops to 3.4A.High efficiency is possible when the supply voltage is set to 13V.It is mounted in the way of Through Hole.7 pins are connected to it in total.Lighting drivers with 100mOhm resistance are used.This case has the output current set to 14A.The LED driver is packaged in an econtainer with a capacity of Peripheral Drivers.For normal operation, the supply voltage (Vsup) must be kept above 6V.This part's power supply is 8/16V.It has a maximum current requirement of 35μA.
VND10B(011Y) Features
Supplied from 13V
Resistance of 100mOhm
VND10B(011Y) Applications
There are a lot of STMicroelectronics VND10B(011Y) Power Switches ICs applications.
- Portable Music Players
- USB Ports/Hubs
- Telecom and Network Systems
- Hot Swap
- Solid State Drivers
- PC Cards
- USB3.1 Power Delivery
- Smart Phones, Feature Phones
- Wireless Modem Data Cards
- Portable Devices
