VND10B(012Y)
| Parameters | |
|---|---|
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | Pentawatt-5 (Straight Leads, Staggered Depth) |
| Number of Pins | 5 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| JESD-609 Code | e0 |
| Feature | Status Flag |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 7 |
| ECCN Code | EAR99 |
| Resistance | 100mOhm |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Subcategory | Peripheral Drivers |
| Max Power Dissipation | 75W |
| Terminal Position | SINGLE |
| Number of Functions | 1 |
| Supply Voltage | 13V |
| Base Part Number | VND10 |
| Pin Count | 7 |
| JESD-30 Code | R-PSFM-T7 |
| Number of Outputs | 2 |
| Output Type | N-Channel |
| Max Output Current | 3.4A |
| Power Supplies | 8/16V |
| Supply Voltage-Min (Vsup) | 6V |
| Interface | On/Off |
| Output Configuration | High Side |
| Output Current | 14A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Max Supply Current | 35μA |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 6V~26V |
| Driver Number of Bits | 2 |
| Fault Protection | Open Load Detect, Over Temperature |
| Rds On (Typ) | 100m Ω (Max) |
| Built-in Protections | TRANSIENT; THERMAL; UNDER VOLTAGE |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
VND10B(012Y) Overview
Tube is the way it's packaged.There is a Pentawatt-5 (Straight Leads, Staggered Depth) package that includes it.The LED driver is mounted as Through Hole.The switch type of this switch is General Purpose.Keeping the temperature at -40°C~150°C TJ ensures reliable operation.There are 2 outputs available on this lighting driver.In order to operate, it requires a voltage supply of Not Required.Voltage output is N-Channel volts at maximum.Status Flag features are available on the lighting driver.The VND10 family consists of this type.The termination count is 7.During operation, the 5 pins are used.Currently, there are 1 functions associated with the lighting driver.As a result, the maximum output current is reduced to 3.4A in order to meet the operation requirements.High efficiency is possible at 13V supply voltage.As a result, it is mounted in the manner of Through Hole.It is equipped with a total of 7 pins.In this LED driving board, there is 100mOhm resistance.This results in a 14A output current.It is self-contained in an econtainer with a capacity of Peripheral Drivers.The supply voltage (Vsup) should be kept above 6V for normal operation.The power supply of the part is 8/16V.The maximum current required for its operation is 35μA.
VND10B(012Y) Features
Supplied from 13V
Resistance of 100mOhm
VND10B(012Y) Applications
There are a lot of STMicroelectronics VND10B(012Y) Power Switches ICs applications.
- Storage (HDDs, SSDs)
- Portable Video Game Players
- Solid-State Drives
- Set-top-box
- Hot Swap
- Hot Swaps
- Low Voltage I/O System Power
- Handheld Devices
- Smartphone and PDA
- Various applications equipped with buttons
