VND10BSP
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | PowerSO-10 Exposed Bottom Pad |
| Number of Pins | 10 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Feature | Status Flag |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Resistance | 65mOhm |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Max Power Dissipation | 75W |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 13V |
| Base Part Number | VND10 |
| Pin Count | 10 |
| Number of Outputs | 2 |
| Output Type | N-Channel |
| Max Output Current | 3.4A |
| Supply Voltage-Min (Vsup) | 6V |
| Interface | On/Off |
| Nominal Supply Current | 35μA |
| Output Configuration | High Side |
| Power Dissipation | 75W |
| Output Current | 14A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Max Supply Current | 35μA |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Output Characteristics | OPEN-SOURCE |
| Output Polarity | TRUE |
| Ratio - Input:Output | 1:1 |
| Input Characteristics | SCHMITT TRIGGER |
| Voltage - Load | 6V~26V |
| Fault Protection | Open Load Detect, Over Temperature |
| Load Current | 14A |
| Output Peak Current Limit-Nom | 3.4A |
| Rds On (Typ) | 100m Ω (Max) |
| Turn Off Time | 500 μs |
| Built-in Protections | TRANSIENT; OVER CURRENT; THERMAL; UNDER VOLTAGE |
| Height Seated (Max) | 3.75mm |
| Length | 9.4mm |
| Width | 7.5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
VND10BSP Overview
As you can see, it's packaged in the way of a Tube.This package is included in PowerSO-10 Exposed Bottom Pad.The lighting driver is mounted in the Surface Mount position.The switch type of this switch is General Purpose.To ensure reliable operation, the temperature should be set to -40°C~150°C TJ.There is a default setting of 2 for output.A supply voltage of Not Required is required for it to operate.There is a maximum output voltage of N-Channel volts on this LED driver.Currently, the LED driving board is equipped with Status Flag features.The VND10 family consists of this type.There are 10 terminations in it.10 pins are used for operation.It consists of 1 functions.The maximum output current drops to 3.4A in order to meet the operation criteria.The supply voltage of 13V is conducive to high efficiency.Surface Mount is mounted in the way of this LED driving board.The LED driving board is equipped with a total of 10 pins.Currently, the LED driving board has 65mOhm resistance.In this case, the output current is set to 14A.In order to operate normally, the supply voltage (Vsup) must be maintained above 6V.There is a maximum current requirement of 35μA for its operation.
VND10BSP Features
Supplied from 13V
Resistance of 65mOhm
VND10BSP Applications
There are a lot of STMicroelectronics VND10BSP Power Switches ICs applications.
- Portable GPS
- HDD and SSD
- Wireless Modem Data Cards
- Handheld Devices
- USB Power Distribution
- USB Power Distribution
- Hard Disk Drives
- Smart Phones, Feature Phones
- Set-top-box
- Storage (HDDs, SSDs)
