VND10BSP-E

N-Channel PMIC VND10 10 Pin PowerSO-10 Exposed Bottom Pad

Manufacturer: STMicroelectronics
Nocochips NO: 761-VND10BSP-E
Package: PowerSO-10 Exposed Bottom Pad
Datasheet: PDF
Stock: 896
Description: N-Channel PMIC VND10 10 Pin PowerSO-10 Exposed Bottom Pad (Kg)

Details

Tags

Parameters
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	PowerSO-10 Exposed Bottom Pad
Number of Pins	10
Supplier Device Package	10-PowerSO
Operating Temperature	-40°C~150°C TJ
Packaging	Tube
Feature	Status Flag
Part Status	Obsolete
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Termination	SMD/SMT
Resistance	65mOhm
Max Operating Temperature	150°C
Min Operating Temperature	-40°C
Max Power Dissipation	75W
Base Part Number	VND10
Number of Outputs	2
Output Voltage	40V
Output Type	N-Channel
Max Output Current	14A
Interface	On/Off
Max Supply Voltage	26V
Min Supply Voltage	6V
Current - Output (Max)	3.4A
Nominal Supply Current	35μA
Output Configuration	High Side
Power Dissipation	75W
Output Current	5.6A
Voltage - Supply (Vcc/Vdd)	Not Required
Max Supply Current	35μA
Input Type	Non-Inverting
Switch Type	General Purpose
Output Current per Channel	3.4A
Ratio - Input:Output	1:1
Voltage - Load	6V~26V
Fault Protection	Open Load Detect, Over Temperature
Rds On (Typ)	100mOhm (Max)
Height	3.65mm
Length	7.6mm
Width	9.5mm
Radiation Hardening	No
REACH SVHC	No SVHC
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

VND10BSP-E Overview

The package is in the form of a Tube.There is a PowerSO-10 Exposed Bottom Pad package that includes it.The lighting driver is mounted in the Surface Mount position.A General Purpose switch type is owned by it.The temperature should be set to -40°C~150°C TJ to ensure reliable functioning.There is a default setting of 2 for output.A supply voltage of Not Required is required for it to operate.A maximum output voltage of N-Channel volts has been specified.It has a total of Status Flag features.The VND10 family consists of this type.In order to operate, 10 pins are used.The LED driver output is limited to 3.4AV.To meet the operation criteria, the maximum output current drops to 14A.As a result, it is mounted in the manner of Surface Mount.In this LED driving board, there is 65mOhm resistance.As a result, the output current is set to 5.6A.In order to ensure stable operation, a maximum operating temperature of 150°C°C should be maintained.To ensure reliability, the system operates at a minimum temperature of -40°C degrees Celsius.A maximum current requirement of 35μA is required for its operation.It can handle a maximum voltage of 26VV.Alternatively, 6V volts can be used if needed.