VND10BSP13TR
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | PowerSO-10 Exposed Bottom Pad |
| Number of Pins | 10 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Feature | Status Flag |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Resistance | 65mOhm |
| Terminal Finish | TIN |
| Max Power Dissipation | 75W |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 13V |
| Base Part Number | VND10 |
| Pin Count | 10 |
| Number of Outputs | 2 |
| Output Type | N-Channel |
| Max Output Current | 14A |
| Supply Voltage-Min (Vsup) | 6V |
| Interface | On/Off |
| Nominal Supply Current | 35μA |
| Output Configuration | High Side |
| Power Dissipation | 75W |
| Output Current | 14A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Max Supply Current | 35μA |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Output Characteristics | OPEN-SOURCE |
| Output Current per Channel | 3.4A |
| Output Polarity | TRUE |
| Ratio - Input:Output | 1:1 |
| Input Characteristics | SCHMITT TRIGGER |
| Voltage - Load | 6V~26V |
| Fault Protection | Open Load Detect, Over Temperature |
| Load Current | 180mA |
| Output Peak Current Limit-Nom | 3.4A |
| Rds On (Typ) | 100m Ω (Max) |
| Turn Off Time | 500 μs |
| Built-in Protections | TRANSIENT; OVER CURRENT; THERMAL; UNDER VOLTAGE |
| Height Seated (Max) | 3.75mm |
| Length | 9.4mm |
| Width | 7.5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
VND10BSP13TR Overview
The package is in the form of a Tape & Reel (TR).The PowerSO-10 Exposed Bottom Pad package includes it.A Surface Mount mounting is used for the LED driving board.There is a General Purpose switch type associated with it.Ensure reliable operation by setting the temperature to -40°C~150°C TJ.By default, it is set to output 2.A supply voltage of Not Required is required for it to operate.It produces a maximum output voltage of N-Channel volts at its maximum output.It is equipped with Status Flag features.The VND10 family consists of this type.The termination count is 10.It is necessary to use the 10 pins in order to operate the LED driver.As far as the lighting driver is concerned, there are 1 functions.This results in the maximum output current dropping to 14A to meet the operation criteria.Using a voltage of 13V allows for high efficiency.The LED driving board is mounted in the way of Surface Mount.10 pins are equipped with it.It has 65mOhm resistance.When this case is used, the output current is set to 14A.The supply voltage (Vsup) should be kept above 6V for normal operation.For its operation, a maximum current requirement of 35μA is required.
VND10BSP13TR Features
Supplied from 13V
Resistance of 65mOhm
VND10BSP13TR Applications
There are a lot of STMicroelectronics VND10BSP13TR Power Switches ICs applications.
- USB3.1 Power Delivery
- USB Ports/Hubs
- Storage Drives
- Wireless Headsets
- Smart Phones, Feature Phones
- USB Power Distribution
- Storage (HDDs, SSDs)
- USB Power Distribution
- Notebook PC
- Portable Devices
