VND10N06-1
| Parameters | |
|---|---|
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | TO-251-3 Short Leads, IPak, TO-251AA |
| Weight | 3.949996g |
| Packaging | Tube |
| Series | OMNIFET™, VIPower™ |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 3 |
| ECCN Code | EAR99 |
| Resistance | 150mOhm |
| Terminal Finish | Matte Tin (Sn) |
| Max Power Dissipation | 35W |
| Technology | MOS |
| Terminal Position | SINGLE |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 2.25mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | VND10 |
| Pin Count | 3 |
| JESD-30 Code | R-XSIP-T3 |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Max Output Current | 6A |
| Interface | On/Off |
| Nominal Supply Current | 150μA |
| Output Configuration | Low Side |
| Power Dissipation | 35W |
| Output Current | 6A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Max Supply Current | 150μA |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Output Characteristics | OPEN-DRAIN |
| Continuous Drain Current (ID) | 10A |
| Output Polarity | TRUE |
| Ratio - Input:Output | 1:1 |
| Input Characteristics | SCHMITT TRIGGER |
| Fault Protection | Current Limiting (Fixed), Over Temperature, Over Voltage |
| Drain to Source Breakdown Voltage | 60V |
| Output Peak Current Limit-Nom | 10A |
| Rds On (Typ) | 150m Ω |
| Drain to Source Resistance | 300mOhm |
| Turn Off Time | 2.3 µs |
| Built-in Protections | TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL |
| Height Seated (Max) | 7.4mm |
| Length | 6.5mm |
| Width | 2.3mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
VND10N06-1 Overview
It is packaged in the form of a Tube.It is included with the TO-251-3 Short Leads, IPak, TO-251AA package as well.Mounting type Through Hole is selected for the LED driving board.The switch type of this switch is General Purpose.By default, it is set to output 1.Operation is based on a supply voltage of Not Required.There is a maximum output voltage of N-Channel volts on this LED driver.This object belongs to the VND10 family.It contains 3 terminations.As far as functions are concerned, the lighting driver has 1.Maximum output current falls to 6A when operation criteria are met.The lighting driver is mounted in the direction of Through Hole.A total of 3 pins are included in this LED driver.It has a resistance of 150mOhm.This electrical component is part of the OMNIFET?, VIPower? series.It is set to 6A in this case.It requires a maximum current requirement of 150μA.
VND10N06-1 Features
Resistance of 150mOhm
VND10N06-1 Applications
There are a lot of STMicroelectronics VND10N06-1 Power Switches ICs applications.
- Low Voltage I/O System Power
- Wireless/Networking Cards
- PDAs
- PC Cards
- Wearable Devices
- Storage Drives
- Mobile Communication Devices
- Hard Disk Drives
- Portable Video Game Players
- Various applications equipped with buttons
