VND10N06-1-E
| Parameters | |
|---|---|
| Lifecycle Status | NRND (Last Updated: 7 months ago) |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | TO-251-3 Short Leads, IPak, TO-251AA |
| Packaging | Tube |
| Series | OMNIFET™, VIPower™ |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Resistance | 150mOhm |
| Max Power Dissipation | 35W |
| Base Part Number | VND10 |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Max Output Current | 10A |
| Interface | On/Off |
| Nominal Supply Current | 150μA |
| Output Configuration | Low Side |
| Power Dissipation | 35W |
| Output Current | 6A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Max Supply Current | 150μA |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Continuous Drain Current (ID) | 10A |
| Ratio - Input:Output | 1:1 |
| Fault Protection | Current Limiting (Fixed), Over Temperature, Over Voltage |
| Drain to Source Breakdown Voltage | 60V |
| Rds On (Typ) | 150m Ω |
| Drain to Source Resistance | 150mOhm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
VND10N06-1-E Overview
Tube is the way it's packaged.It's included in the TO-251-3 Short Leads, IPak, TO-251AA package.Mounting type Through Hole is selected for the LED driving board.This switch is of type General Purpose.There is a default setting of 1 for output.The LED driving board operates at Not Required volts.There is a maximum output voltage of N-Channel volts on this LED driver.It is part of the VND10 family of LED drivers.The maximum output current is reduced to 10A to meet the operation criteria.In this case, it is mounted in the way of Through Hole.It has 150mOhm resistance.These electrical components are part of the OMNIFET?, VIPower? series.It is set to 6A in this case.For its operation, a current of 150μA is required.
VND10N06-1-E Features
Resistance of 150mOhm
VND10N06-1-E Applications
There are a lot of STMicroelectronics VND10N06-1-E Power Switches ICs applications.
- Hard Disk Drives
- HDD and SSD
- Hot Swaps
- Smartphone and PDA
- Solid State Drivers
- Storage (HDDs, SSDs)
- Low Voltage I/O System Power
- USB3.1 Power Delivery
- Solid-State Drives
- Telecom and Network Systems
