Parameters |
Turn On Delay Time |
1.1 μs |
Switch Type |
General Purpose |
Turn-Off Delay Time |
200 ns |
Continuous Drain Current (ID) |
10A |
Ratio - Input:Output |
1:1 |
Fault Protection |
Current Limiting (Fixed), Over Temperature, Over Voltage |
Drain to Source Breakdown Voltage |
60V |
Output Peak Current Limit-Nom |
10A |
Rds On (Typ) |
150m Ω |
Drain to Source Resistance |
150mOhm |
Built-in Protections |
TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL |
Height |
2.4mm |
Length |
6.6mm |
Width |
6.2mm |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 6 months ago) |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
TO-252-3, DPak (2 Leads + Tab), SC-63 |
Number of Pins |
3 |
Packaging |
Tube |
Series |
OMNIFET™, VIPower™ |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
3 (168 Hours) |
Number of Terminations |
2 |
Resistance |
150mOhm |
Max Power Dissipation |
35W |
Terminal Position |
SINGLE |
Terminal Form |
GULL WING |
Number of Functions |
1 |
Terminal Pitch |
2.28mm |
Base Part Number |
VND10 |
JESD-30 Code |
R-PSSO-G2 |
Number of Outputs |
1 |
Output Type |
N-Channel |
Max Output Current |
10A |
Interface |
On/Off |
Nominal Supply Current |
150μA |
Output Configuration |
Low Side |
Power Dissipation |
35W |
Output Current |
6A |
Voltage - Supply (Vcc/Vdd) |
Not Required |
Max Supply Current |
150μA |
Input Type |
Non-Inverting |
VND10N06-E Overview
As a result, it is packaged in the form of a Tube.The TO-252-3, DPak (2 Leads + Tab), SC-63 package contains it.In this case, the LED driving board is mounted as Surface Mount.General Purpose is the switch type that it owns.The LED driver is equipped with 1 outputs.The LED driving board operates with a supply voltage of Not Required.It has a maximum output voltage of N-Channel volts.There is a VND10 family of things that it belongs to.In total, there are 2 terminations.The operation is carried out using the 3 pins.It contains 1 functions.This operation requires the maximum output current to be decreased to 10A.Surface Mount is mounted in the way of this LED driving board.It has a resistance of 150mOhm.A component of this type is included in the OMNIFET?, VIPower? series.This results in a 6A output current.It has a maximum current requirement of 150μA.
VND10N06-E Features
Resistance of 150mOhm
VND10N06-E Applications
There are a lot of STMicroelectronics VND10N06-E Power Switches ICs applications.
- Hot-Swap Systems
- Gaming
- Portable Video Game Players
- Smartphone and PDA
- HDD and SSD
- Storage (HDDs, SSDs)
- Telecom and Network Systems
- Notebook PC
- USB Protection
- Hot Swap