Parameters |
Lifecycle Status |
NRND (Last Updated: 8 months ago) |
Mount |
Through Hole |
Mounting Type |
Through Hole |
Package / Case |
TO-251-3 Short Leads, IPak, TO-251AA |
Number of Pins |
3 |
Weight |
3.949996g |
Operating Temperature |
-40°C~150°C TJ |
Packaging |
Tube |
Series |
OMNIFET II™, VIPower™ |
JESD-609 Code |
e3 |
Part Status |
Obsolete |
Moisture Sensitivity Level (MSL) |
3 (168 Hours) |
Number of Terminations |
3 |
ECCN Code |
EAR99 |
Resistance |
35mOhm |
Terminal Finish |
Matte Tin (Sn) |
Max Power Dissipation |
74W |
Terminal Position |
SINGLE |
Number of Functions |
1 |
Terminal Pitch |
2.25mm |
Base Part Number |
VND14 |
Pin Count |
3 |
Number of Outputs |
1 |
Output Type |
N-Channel |
Max Output Current |
12A |
Interface |
On/Off |
Nominal Supply Current |
100μA |
Output Configuration |
Low Side |
Power Dissipation |
74W |
Output Current |
12A |
Voltage - Supply (Vcc/Vdd) |
Not Required |
Max Supply Current |
100μA |
Input Type |
Non-Inverting |
Switch Type |
General Purpose |
Continuous Drain Current (ID) |
12A |
Ratio - Input:Output |
1:1 |
Voltage - Load |
36V Max |
Fault Protection |
Current Limiting (Fixed), Over Temperature, Over Voltage |
Drain to Source Breakdown Voltage |
40V |
Turn On Time |
4.5 µs |
Output Peak Current Limit-Nom |
18A |
Rds On (Typ) |
35m Ω (Max) |
Drain to Source Resistance |
35mOhm |
Turn Off Time |
25 µs |
Built-in Protections |
TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL |
Length |
6.5mm |
Width |
2.4mm |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
VND14NV04-1 Overview
The package is in the form of a Tube.The TO-251-3 Short Leads, IPak, TO-251AA package contains it.Through Hole is the mounting type of the LED driver.There is a switch type of General Purpose.It is recommended to set the temperature to -40°C~150°C TJ in order to ensure reliable operation.The LED driver has 1 outputs.To operate, it needs a supply voltage of Not Required.There is a maximum output voltage of N-Channel volts.It belongs to the family VND14.It consists of 3 terminations in total.The 3 pins are used to operate the LED driver.The LED driving board has a total of 1 functions.This operation requires the maximum output current to be decreased to 12A.As a result, it is mounted in the manner of Through Hole.A total of 3 pins are included in this LED driver.Currently, the LED driving board has a resistance of 35mOhm ohms.It belongs to the OMNIFET II?, VIPower? series.When this case is used, the output current is set to 12A.For its operation, a maximum current requirement of 100μA is required.
VND14NV04-1 Features
Resistance of 35mOhm
VND14NV04-1 Applications
There are a lot of STMicroelectronics VND14NV04-1 Power Switches ICs applications.
- Portable/Handheld Devices
- Set-Top Boxes
- USB Power Distribution
- USB Ports/Hubs
- Telecom and Network Systems
- PDAs
- Handheld Devices
- Hot-Swap Systems
- Wireless Headsets
- Portable Devices