Parameters |
Lifecycle Status |
NRND (Last Updated: 6 months ago) |
Mount |
Through Hole |
Mounting Type |
Through Hole |
Package / Case |
TO-251-3 Short Leads, IPak, TO-251AA |
Operating Temperature |
-40°C~150°C TJ |
Packaging |
Tube |
Series |
OMNIFET III™, VIPower™ |
JESD-609 Code |
e3 |
Part Status |
Obsolete |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
3 |
ECCN Code |
EAR99 |
Resistance |
35mOhm |
Terminal Finish |
Matte Tin (Sn) - annealed |
Max Power Dissipation |
74W |
Terminal Position |
SINGLE |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Terminal Pitch |
2.25mm |
Base Part Number |
VND14 |
Pin Count |
3 |
JESD-30 Code |
R-PSIP-T3 |
Number of Outputs |
1 |
Output Type |
N-Channel |
Max Output Current |
18A |
Interface |
On/Off |
Nominal Supply Current |
100μA |
Output Configuration |
Low Side |
Power Dissipation |
74W |
Output Current |
12A |
Voltage - Supply (Vcc/Vdd) |
Not Required |
Max Supply Current |
100μA |
Input Type |
Non-Inverting |
Switch Type |
General Purpose |
Output Current per Channel |
12A |
Continuous Drain Current (ID) |
12A |
Ratio - Input:Output |
1:1 |
Voltage - Load |
36V Max |
Fault Protection |
Current Limiting (Fixed), Over Temperature, Over Voltage |
Drain to Source Breakdown Voltage |
40V |
Turn On Time |
4.5 µs |
Output Peak Current Limit-Nom |
18A |
Rds On (Typ) |
35m Ω (Max) |
Drain to Source Resistance |
35mOhm |
Turn Off Time |
25 µs |
Built-in Protections |
TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL |
Length |
6.5mm |
Width |
2.4mm |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
VND14NV04-1-E Overview
It's?packaged?in?the way?of?a?Tube.This file is included in package TO-251-3 Short Leads, IPak, TO-251AA.The LED driver is mounted as Through Hole.There is a switch type of General Purpose.It is recommended to set the temperature to -40°C~150°C TJ in order to ensure reliable operation.There are 1 outputs available on this lighting driver.Operation is based on Not Required supply voltage.A maximum output voltage of N-Channel volts can be obtained with this LED driver.It comes under the family of VND14.It consists of 3 terminations in total.The LED driving board has a total of 1 functions.To meet the operation criteria, the maximum output current drops to 18A.Through Hole is mounted in the way.The LED driver has a total of 3 pins.In this LED driving board, there is 35mOhm resistance.It is part of the OMNIFET III?, VIPower? series.As a result, the output current is set to 12A.A maximum current requirement of 100μA is required for its operation.
VND14NV04-1-E Features
Resistance of 35mOhm
VND14NV04-1-E Applications
There are a lot of STMicroelectronics VND14NV04-1-E Power Switches ICs applications.
- Storage Drives
- Portable Music Players
- Hot Swaps
- Portable GPS
- Wireless Modem Data Cards
- USB3.1 Power Delivery
- Wireless Headsets
- USB Power Distribution
- Portable/Handheld Devices
- Portable GPS Device