Parameters |
Continuous Drain Current (ID) |
12A |
Ratio - Input:Output |
1:1 |
Voltage - Load |
36V Max |
Fault Protection |
Current Limiting (Fixed), Over Temperature, Over Voltage |
Drain to Source Breakdown Voltage |
40V |
Turn On Time |
4.5 µs |
Output Peak Current Limit-Nom |
18A |
Rds On (Typ) |
35m Ω (Max) |
Drain to Source Resistance |
35mOhm |
Turn Off Time |
25 µs |
Built-in Protections |
TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL |
Length |
6.5mm |
Radiation Hardening |
No |
RoHS Status |
Non-RoHS Compliant |
Lead Free |
Contains Lead |
Lifecycle Status |
ACTIVE (Last Updated: 8 months ago) |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
TO-252-3, DPak (2 Leads + Tab), SC-63 |
Number of Pins |
3 |
Weight |
329.988449mg |
Operating Temperature |
-40°C~150°C TJ |
Packaging |
Tube |
Series |
OMNIFET II™, VIPower™ |
JESD-609 Code |
e3 |
Part Status |
Obsolete |
Moisture Sensitivity Level (MSL) |
3 (168 Hours) |
Number of Terminations |
2 |
ECCN Code |
EAR99 |
Resistance |
35mOhm |
Terminal Finish |
Matte Tin (Sn) - annealed |
Voltage - Rated DC |
40V |
Max Power Dissipation |
74W |
Terminal Position |
SINGLE |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Terminal Pitch |
2.25mm |
Current Rating |
12A |
Time@Peak Reflow Temperature-Max (s) |
30 |
Base Part Number |
VND14 |
Pin Count |
3 |
JESD-30 Code |
R-PSSO-G2 |
Number of Outputs |
1 |
Output Type |
N-Channel |
Max Output Current |
12A |
Interface |
On/Off |
Nominal Supply Current |
100μA |
Output Configuration |
Low Side |
Power Dissipation |
74W |
Output Current |
12A |
Voltage - Supply (Vcc/Vdd) |
Not Required |
Max Supply Current |
100μA |
Input Type |
Non-Inverting |
Switch Type |
General Purpose |
VND14NV04 Overview
It is package in Tube case.This package is included in TO-252-3, DPak (2 Leads + Tab), SC-63.This LED driving board is mounted using the mounting type Surface Mount.General Purpose is the switch type it owns.It is recommended to set the temperature to -40°C~150°C TJ in order to ensure reliable operation.The LED driver has 1 outputs.The LED driving board operates at Not Required volts.A maximum output voltage of N-Channel volts can be achieved by this LED driver.It belongs to the family VND14.A total of 2 terminations have been recorded.For operation, 3 pins are used.As far as functions are concerned, the lighting driver has 1.Maximum output current falls to 12A when operation criteria are met.It is positioned in the direction of Surface Mount.A total of 3 pins are included in this LED driver.It has 35mOhm resistance.A component of this type is included in the OMNIFET II?, VIPower? series.As a result, the output current is set to 12A.It operates at a maximum current of 100μA.
VND14NV04 Features
Resistance of 35mOhm
VND14NV04 Applications
There are a lot of STMicroelectronics VND14NV04 Power Switches ICs applications.
- Hard Disk Drives
- PDAs
- Smartphone and PDA
- Telecom and Network Systems
- Solid State Drivers
- Portable GPS Device
- Notebook PC
- Storage (HDDs, SSDs)
- Wireless/Networking Cards
- Low Voltage I/O System Power