VND1NV04-1
| Parameters | |
|---|---|
| Mount | Surface Mount, Through Hole |
| Mounting Type | Surface Mount |
| Package / Case | TO-252-3, DPak (2 Leads + Tab), SC-63 |
| Number of Pins | 3 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Series | OMNIFET II™, VIPower™ |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Resistance | 250mOhm |
| Base Part Number | VND1N |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Max Output Current | 1.7A |
| Interface | On/Off |
| Nominal Supply Current | 100μA |
| Output Configuration | Low Side |
| Output Current | 1.7A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Max Supply Current | 100μA |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Continuous Drain Current (ID) | 20A |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 36V Max |
| Fault Protection | Current Limiting (Fixed), Over Temperature, Over Voltage |
| Rds On (Typ) | 250m Ω (Max) |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
VND1NV04-1 Overview
As you can see, it's packaged in the way of a Tube.The TO-252-3, DPak (2 Leads + Tab), SC-63 package includes it.A Surface Mount mounting is used for the LED driving board.It owns the General Purpose switch type.To ensure reliable performance, the temperature should be set to -40°C~150°C TJ.The LED driver has a total of 1 outputs.To operate, it needs a supply voltage of Not Required.There is a maximum output voltage of N-Channel volts on this LED driver.It is part of the VND1N family of LED drivers.During operation, the 3 pins are used.To comply with the operation criteria, the maximum output current is reduced to 1.7A.The LED driving board is mounted in the way of Surface Mount, Through Hole.In this LED driving board, there is 250mOhm resistance.It belongs to the OMNIFET II?, VIPower? series.This case results in a 1.7A output current.The maximum current required for its operation is 100μA.
VND1NV04-1 Features
Resistance of 250mOhm
VND1NV04-1 Applications
There are a lot of STMicroelectronics VND1NV04-1 Power Switches ICs applications.
- Portable Music Players
- Wireless Modem Data Cards
- Hot Swaps
- Hard Disk Drives
- Notebook PC
- Handheld Devices
- Gaming
- Various applications equipped with buttons
- Smartphone and PDA
- Wearable Devices
