VND1NV04-E
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | TO-252-3, DPak (2 Leads + Tab), SC-63 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Series | OMNIFET II™, VIPower™ |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 2 |
| ECCN Code | EAR99 |
| Resistance | 250mOhm |
| Terminal Finish | MATTE TIN |
| Max Power Dissipation | 35W |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 225 |
| Number of Functions | 1 |
| Terminal Pitch | 2.25mm |
| Base Part Number | VND1N |
| Pin Count | 3 |
| JESD-30 Code | R-PSSO-G2 |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Max Output Current | 1.7A |
| Interface | On/Off |
| Element Configuration | Single |
| Nominal Supply Current | 100μA |
| Output Configuration | Low Side |
| Power Dissipation | 35W |
| Output Current | -3A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Max Supply Current | 100μA |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Rise Time | 500ns |
| Fall Time (Typ) | 600 ns |
| Continuous Drain Current (ID) | 7A |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 36V Max |
| Fault Protection | Current Limiting (Fixed), Over Temperature, Over Voltage |
| Output Peak Current Limit-Nom | 1.7A |
| Rds On (Typ) | 250m Ω (Max) |
| Turn Off Time | 5.5 μs |
| Built-in Protections | TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL |
| Height Seated (Max) | 2.63mm |
| Length | 6.5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
VND1NV04-E Overview
A Tube is used to package it.This file is included in package TO-252-3, DPak (2 Leads + Tab), SC-63.It has been mounted as Surface Mount on the LED driver.There is a General Purpose switch type associated with it.It is recommended that the temperature be set to -40°C~150°C TJ for reliable performance.The lighting driver is equipped with 1 outputs that can be used.The LED driving board is powered by a voltage of Not Required.There is a maximum output voltage of N-Channel volts.The VND1N family consists of this type.It contains 2 terminations.There are 1 functions of the LED driver.The maximum output current must drop to 1.7A to meet the operation criteria.It is positioned in the direction of Surface Mount.As a result, it has a total of 3 pins.The LED driver has 250mOhm resistance.This electrical component is included in the OMNIFET II?, VIPower? series.This results in a -3A output current.It requires 100μA current to operate.
VND1NV04-E Features
Resistance of 250mOhm
VND1NV04-E Applications
There are a lot of STMicroelectronics VND1NV04-E Power Switches ICs applications.
- Wearable Devices
- PDAs
- Gaming
- Portable Devices
- PC Cards
- USB Power Distribution
- Storage (HDDs, SSDs)
- Various applications equipped with buttons
- PC Card Hot Swap
- Smartphone and PDA
