VND1NV0413TR
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | TO-252-3, DPak (2 Leads + Tab), SC-63 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Series | OMNIFET II™, VIPower™ |
| JESD-609 Code | e3 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 2 |
| ECCN Code | EAR99 |
| Resistance | 250mOhm |
| Terminal Finish | Matte Tin (Sn) |
| Max Power Dissipation | 35W |
| Terminal Position | SINGLE |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Terminal Pitch | 2.25mm |
| Base Part Number | VND1N |
| Pin Count | 3 |
| JESD-30 Code | R-PSSO-G2 |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Max Output Current | 1.7A |
| Interface | On/Off |
| Nominal Supply Current | 100μA |
| Output Configuration | Low Side |
| Power Dissipation | 35W |
| Output Current | 1.7A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Max Supply Current | 100μA |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Continuous Drain Current (ID) | 1.7A |
| Ratio - Input:Output | 1:1 |
| Gate to Source Voltage (Vgs) | 20V |
| Voltage - Load | 36V Max |
| Fault Protection | Current Limiting (Fixed), Over Temperature, Over Voltage |
| Drain to Source Breakdown Voltage | 40V |
| Output Peak Current Limit-Nom | 1.7A |
| Rds On (Typ) | 250m Ω (Max) |
| Drain to Source Resistance | 250mOhm |
| Turn Off Time | 5.5 μs |
| Built-in Protections | TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL |
| Height Seated (Max) | 2.63mm |
| Length | 6.5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
VND1NV0413TR Overview
Tape & Reel (TR) is how it's packaged.There is a package for it in the TO-252-3, DPak (2 Leads + Tab), SC-63 package.A Surface Mount mounting is used for the LED driving board.General Purpose is the switch type it owns.It is recommended that the temperature be set to -40°C~150°C TJ for reliable performance.It is possible to use 1 outputs in the lighting driver.Operation is based on Not Required supply voltage.A maximum voltage of N-Channel volts is available from the output of this LED driver.The VND1N family contains this object.A total of 2 terminations have been found in it.Currently, there are 1 functions associated with the lighting driver.This results in the maximum output current dropping to 1.7A to meet the operation criteria.In this case, it is mounted in the way of Surface Mount.As a result, it has a total of 3 pins.It has 250mOhm resistance.This electrical component is included in the OMNIFET II?, VIPower? series.The output current is set to 1.7A in this case.For its operation, a current of 100μA is required.
VND1NV0413TR Features
Resistance of 250mOhm
VND1NV0413TR Applications
There are a lot of STMicroelectronics VND1NV0413TR Power Switches ICs applications.
- Portable/Handheld Devices
- Mobile Communication Devices
- USB Power Distribution
- USB Power Distribution
- Set-top-box
- HDD and SSD
- Solid State Drivers
- Hot Swap
- USB Protection
- Hot Swap
