VND1NV04TR-E
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | TO-252-3, DPak (2 Leads + Tab), SC-63 |
| Number of Pins | 3 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Series | OMNIFET II™, VIPower™ |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 2 |
| ECCN Code | EAR99 |
| Resistance | 250mOhm |
| Terminal Finish | Matte Tin (Sn) |
| Max Power Dissipation | 35W |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 225 |
| Number of Functions | 1 |
| Terminal Pitch | 2.25mm |
| Base Part Number | VND1N |
| Pin Count | 3 |
| JESD-30 Code | R-PSSO-G2 |
| Output Type | N-Channel |
| Max Output Current | 1.7A |
| Voltage | 40V |
| Interface | On/Off |
| Element Configuration | Single |
| Nominal Supply Current | 100μA |
| Current | 1.7A |
| Output Configuration | Low Side |
| Power Dissipation | 35W |
| Output Current | 1.7A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Max Supply Current | 100μA |
| Input Type | Non-Inverting |
| Turn On Delay Time | 200 ns |
| Switch Type | General Purpose |
| Rise Time | 170ns |
| Drain to Source Voltage (Vdss) | 40V |
| Fall Time (Typ) | 200 ns |
| Turn-Off Delay Time | 1 μs |
| Continuous Drain Current (ID) | 500mA |
| Threshold Voltage | 2.5V |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 36V Max |
| Fault Protection | Current Limiting (Fixed), Over Temperature, Over Voltage |
| Drain to Source Breakdown Voltage | 40V |
| Number of Drivers | 1 |
| Output Peak Current Limit-Nom | 1.7A |
| Rds On (Typ) | 250m Ω (Max) |
| Drain to Source Resistance | 250mOhm |
| Turn Off Time | 5.5 μs |
| Built-in Protections | TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL |
| Height | 2.4mm |
| Length | 6.6mm |
| Width | 6.2mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
VND1NV04TR-E Overview
It is packaged in the form of a Tape & Reel (TR).There is a TO-252-3, DPak (2 Leads + Tab), SC-63 package that includes it.Mounting type Surface Mount is selected for the LED driving board.There is a General Purpose switch type associated with it.To ensure reliable operation, set the temperature to -40°C~150°C TJ.Operation is based on a supply voltage of Not Required.It produces a maximum output voltage of N-Channel volts at its maximum output.The VND1N family consists of this type.It contains 2 terminations.For operation, 3 pins are used.There are 1 functions of the LED driver.In order to meet the operation criteria, the maximum output current drops to 1.7A.Surface Mount is mounted in the way of this LED driving board.3 pins are connected to it in total.250mOhm resistance is present in the lighting driver.The OMNIFET II?, VIPower? series includes this electrical component.When this case is used, the output current is set to 1.7A.It operates at a maximum current of 100μA.There are 1 drivers associated with this part.
VND1NV04TR-E Features
Resistance of 250mOhm
VND1NV04TR-E Applications
There are a lot of STMicroelectronics VND1NV04TR-E Power Switches ICs applications.
- USB3.1 Power Delivery
- Portable GPS
- Smartphone and PDA
- Portable Video Game Players
- Gaming
- USB Power Distribution
- Low Voltage I/O System Power
- Portable GPS Device
- PDAs
- Hard Disk Drives
