VND3NV04
| Parameters | |
|---|---|
| Lifecycle Status | ACTIVE (Last Updated: 8 months ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | TO-252-3, DPak (2 Leads + Tab), SC-63 |
| Number of Pins | 3 |
| Weight | 329.988449mg |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Series | OMNIFET II™, VIPower™ |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 2 |
| ECCN Code | EAR99 |
| Resistance | 120mOhm |
| Max Power Dissipation | 35W |
| Terminal Position | SINGLE |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Terminal Pitch | 2.28mm |
| Base Part Number | VND3N |
| Pin Count | 3 |
| JESD-30 Code | R-PSSO-G2 |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Max Output Current | 5A |
| Interface | On/Off |
| Nominal Supply Current | 100μA |
| Output Configuration | Low Side |
| Power Dissipation | 35W |
| Output Current | 3.5A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Max Supply Current | 100μA |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Continuous Drain Current (ID) | 3.5A |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 36V Max |
| Fault Protection | Current Limiting (Fixed), Over Temperature, Over Voltage |
| Drain to Source Breakdown Voltage | 40V |
| Output Peak Current Limit-Nom | 5A |
| Rds On (Typ) | 120m Ω (Max) |
| Drain to Source Resistance | 120mOhm |
| Built-in Protections | TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL |
| Length | 6.5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
VND3NV04 Overview
It is packaged in the form of a Tube.It is included in the package TO-252-3, DPak (2 Leads + Tab), SC-63.The mounting type of the LED driver is Surface Mount.The switch type is General Purpose.Ensure reliable operation by setting the temperature to -40°C~150°C TJ.The lighting driver has a total of 1 outputs that are available for use.The LED driving board operates with a supply voltage of Not Required.A maximum voltage of N-Channel volts is available from the output of this LED driver.This object belongs to the VND3N family.In total, there are 2 terminations.In order to operate, the 3 pins are used.It is important to note that the LED driving board has 1 functions.This operation requires the maximum output current to be decreased to 5A.Surface Mount is mounted in the way of this lighting driver.3 pins are equipped with it.120mOhm is the resistance of the lighting driver.This electrical component is part of the OMNIFET II?, VIPower? series.When this is the case, the output current is set to 3.5A.The maximum current required for its operation is 100μA.
VND3NV04 Features
Resistance of 120mOhm
VND3NV04 Applications
There are a lot of STMicroelectronics VND3NV04 Power Switches ICs applications.
- Hot-Swap Systems
- USB Power Distribution
- Wireless Headsets
- Low Voltage I/O System Power
- USB Protection
- Smartphone and PDA
- Portable GPS Device
- Mobile Communication Devices
- Wearable Devices
- Portable Video Game Players
