Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 6 months ago) |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
TO-252-3, DPak (2 Leads + Tab), SC-63 |
Number of Pins |
3 |
Operating Temperature |
-40°C~150°C TJ |
Packaging |
Tube |
Series |
OMNIFET II™, VIPower™ |
JESD-609 Code |
e3 |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
3 (168 Hours) |
Number of Terminations |
2 |
ECCN Code |
EAR99 |
Resistance |
120mOhm |
Terminal Finish |
Tin (Sn) |
Max Power Dissipation |
35W |
Terminal Position |
SINGLE |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Terminal Pitch |
2.28mm |
Time@Peak Reflow Temperature-Max (s) |
30 |
Base Part Number |
VND3N |
Pin Count |
3 |
JESD-30 Code |
R-PSSO-G2 |
Number of Outputs |
1 |
Output Type |
N-Channel |
Max Output Current |
5A |
Interface |
On/Off |
Nominal Supply Current |
100μA |
Output Configuration |
Low Side |
Power Dissipation |
35W |
Output Current |
3.5A |
Voltage - Supply (Vcc/Vdd) |
Not Required |
Max Supply Current |
100μA |
Input Type |
Non-Inverting |
Switch Type |
General Purpose |
Continuous Drain Current (ID) |
3.5A |
Ratio - Input:Output |
1:1 |
Voltage - Load |
36V Max |
Fault Protection |
Current Limiting (Fixed), Over Temperature, Over Voltage |
Drain to Source Breakdown Voltage |
40V |
Output Peak Current Limit-Nom |
5A |
Rds On (Typ) |
120m Ω (Max) |
Drain to Source Resistance |
120mOhm |
Built-in Protections |
TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL |
Length |
6.5mm |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
VND3NV04-E Overview
It's?packaged?in?the way?of?a?Tube.In the TO-252-3, DPak (2 Leads + Tab), SC-63 package, it is included.The mounting type of the LED driver is Surface Mount.The switch type is General Purpose.To ensure reliable operation, set the temperature to -40°C~150°C TJ.As a default, the output is set to 1.Operation is based on a supply voltage of Not Required.There is a maximum output voltage of N-Channel volts on this LED driver.It is a member of the VND3N family.It has a total of 2 terminations.During operation, the 3 pins are used.It contains 1 functions.It is necessary to reduce the maximum output current to 5A to meet the operation criteria.Surface Mount is mounted in the way.This LED driver is equipped with a total of 3 pins.In this case, there is 120mOhm resistance in the LED driving board.It belongs to the OMNIFET II?, VIPower? series.The output current is set to 3.5A in this case.It has a maximum current requirement of 100μA.
VND3NV04-E Features
Resistance of 120mOhm
VND3NV04-E Applications
There are a lot of STMicroelectronics VND3NV04-E Power Switches ICs applications.
- PC Card Hot Swap
- USB3.1 Power Delivery
- Hard Disk Drives
- HDD and SSD
- Hot Swaps
- PDAs
- PC Cards
- Portable GPS
- Portable Video Game Players
- Wireless Headsets