VND3NV0413TR
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | TO-252-3, DPak (2 Leads + Tab), SC-63 |
| Number of Pins | 3 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Series | OMNIFET II™, VIPower™ |
| JESD-609 Code | e3 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 2 |
| ECCN Code | EAR99 |
| Resistance | 120mOhm |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Voltage - Rated DC | 40V |
| Max Power Dissipation | 35W |
| Terminal Position | SINGLE |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 2.28mm |
| Current Rating | 3.5A |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | VND3N |
| Pin Count | 3 |
| JESD-30 Code | R-PSSO-G2 |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Max Output Current | 3.5A |
| Interface | On/Off |
| Nominal Supply Current | 100μA |
| Output Configuration | Low Side |
| Power Dissipation | 35W |
| Output Current | 3.5A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Max Supply Current | 100μA |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Continuous Drain Current (ID) | 3.5A |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 36V Max |
| Fault Protection | Current Limiting (Fixed), Over Temperature, Over Voltage |
| Drain to Source Breakdown Voltage | 40V |
| Output Peak Current Limit-Nom | 5A |
| Rds On (Typ) | 120m Ω (Max) |
| Drain to Source Resistance | 120mOhm |
| Built-in Protections | TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL |
| Length | 6.5mm |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
VND3NV0413TR Overview
Tape & Reel (TR) is how it's packaged.This file is included in package TO-252-3, DPak (2 Leads + Tab), SC-63.The mounting type of the LED driver is Surface Mount.It owns the General Purpose switch type.The temperature should be set to -40°C~150°C TJ to ensure reliable functioning.There are 1 outputs available on this lighting driver.The LED driving board operates at Not Required volts.A maximum output voltage of N-Channel volts can be obtained with this LED driver.The VND3N family contains this object.In total, there are 2 terminations.3 pins are used for operation.Currently, there are 1 functions associated with the lighting driver.This results in the maximum output current dropping to 3.5A to meet the operation criteria.Surface Mount is mounted in the way of this lighting driver.A total of 3 pins are included in this LED driver.It has 120mOhm resistance.Electrical components such as this are included in the OMNIFET II?, VIPower? series.The output current is set to 3.5A in this case.A maximum current requirement of 100μA is required for its operation.
VND3NV0413TR Features
Resistance of 120mOhm
VND3NV0413TR Applications
There are a lot of STMicroelectronics VND3NV0413TR Power Switches ICs applications.
- Telecom and Network Systems
- Smart Phones, Feature Phones
- USB Power Distribution
- USB Power Distribution
- Storage (HDDs, SSDs)
- Portable Devices
- Hot Swap
- USB Protection
- Wireless Modem Data Cards
- Hot Swap
