Parameters |
Output Type |
N-Channel |
Max Output Current |
5A |
Interface |
On/Off |
Nominal Supply Current |
100μA |
Output Configuration |
Low Side |
Power Dissipation |
35W |
Output Current |
3.5A |
Voltage - Supply (Vcc/Vdd) |
Not Required |
Max Supply Current |
100μA |
Input Type |
Non-Inverting |
Turn On Delay Time |
90 ns |
Switch Type |
General Purpose |
Rise Time |
250ns |
Fall Time (Typ) |
250 ns |
Turn-Off Delay Time |
450 ns |
Continuous Drain Current (ID) |
3.5A |
Ratio - Input:Output |
1:1 |
Voltage - Load |
36V Max |
Fault Protection |
Current Limiting (Fixed), Over Temperature, Over Voltage |
Drain to Source Breakdown Voltage |
40V |
Output Peak Current Limit-Nom |
5A |
Rds On (Typ) |
120m Ω (Max) |
Drain to Source Resistance |
120mOhm |
Built-in Protections |
TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL |
Length |
6.5mm |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 7 months ago) |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
TO-252-3, DPak (2 Leads + Tab), SC-63 |
Number of Pins |
3 |
Operating Temperature |
-40°C~150°C TJ |
Packaging |
Tape & Reel (TR) |
Series |
OMNIFET II™, VIPower™ |
JESD-609 Code |
e3 |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
3 (168 Hours) |
Number of Terminations |
2 |
ECCN Code |
EAR99 |
Resistance |
120mOhm |
Terminal Finish |
Tin (Sn) |
Max Power Dissipation |
35W |
Terminal Position |
SINGLE |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Terminal Pitch |
2.28mm |
Time@Peak Reflow Temperature-Max (s) |
30 |
Base Part Number |
VND3N |
Pin Count |
3 |
JESD-30 Code |
R-PSSO-G2 |
Number of Outputs |
1 |
VND3NV04TR-E Overview
As a result, it is packaged in the form of a Tape & Reel (TR).It is included with the TO-252-3, DPak (2 Leads + Tab), SC-63 package as well.This lighting drivere has a mounting type of Surface Mount.The switch type is General Purpose.To ensure reliable performance, the temperature should be set to -40°C~150°C TJ.The lighting driver is equipped with 1 outputs that can be used.The LED driving board is powered by a voltage of Not Required.A maximum output voltage of N-Channel volts has been specified.This object belongs to the VND3N family.It contains 2 terminations.The 3 pins are used to operate the LED driver.There are 1 functions of the LED driver.To meet the operation criteria, the maximum output current drops to 5A.The lighting driver is mounted in the way of Surface Mount.The LED driving board is equipped with a total of 3 pins.Currently, the LED driving board has a resistance of 120mOhm ohms.This electrical component can be found in the OMNIFET II?, VIPower? series.This case has the output current set to 3.5A.The maximum current required for its operation is 100μA.
VND3NV04TR-E Features
Resistance of 120mOhm
VND3NV04TR-E Applications
There are a lot of STMicroelectronics VND3NV04TR-E Power Switches ICs applications.
- USB3.1 Power Delivery
- Storage (HDDs, SSDs)
- Hard Disk Drives
- Set-top-box
- Storage Drives
- Solid-State Drives
- Wireless Headsets
- Wireless Modem Data Cards
- Smart Phones, Feature Phones
- Hot-Swap Systems