VND5004A-E
| Parameters | |
|---|---|
| Max Output Current | 100A |
| Operating Supply Voltage | 13V |
| Interface | On/Off |
| Nominal Supply Current | 6mA |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Max Supply Current | 6mA |
| Input Type | Non-Inverting |
| Turn On Delay Time | 25 μs |
| Switch Type | General Purpose |
| Clamping Voltage | 52V |
| Output Current per Channel | 70A |
| Turn-Off Delay Time | 35 μs |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 4.5V~27V |
| Driver Number of Bits | 2 |
| Fault Protection | Current Limiting (Fixed), Over Temperature, Over Voltage |
| Output Peak Current Limit-Nom | 100A |
| Rds On (Typ) | 4m Ω (Max) |
| Built-in Protections | TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL |
| Output Current Flow Direction | SINK |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 8 months ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 24-PowerDFN |
| Number of Pins | 24 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tray |
| Series | VIPower™ |
| JESD-609 Code | e3 |
| Feature | Auto Restart |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Resistance | 4mOhm |
| Terminal Finish | MATTE TIN |
| Subcategory | Peripheral Drivers |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 225 |
| Number of Functions | 1 |
| Supply Voltage | 13V |
| Terminal Pitch | 0.9mm |
| Current Rating | 100A |
| Base Part Number | VND5004 |
| Pin Count | 16 |
| JESD-30 Code | S-PQCC-N16 |
| Number of Outputs | 2 |
| Output Type | N-Channel |
VND5004A-E Overview
Tray is how it's packaged.It is included with the 24-PowerDFN package as well.The lighting driver is mounted in the Surface Mount position.There is a General Purpose switch type associated with it.To ensure reliable operation, set the temperature to -40°C~150°C TJ.The LED driver has a total of 2 outputs.In order to operate, it requires a voltage supply of Not Required.It has a maximum output voltage of N-Channel volts.There are Auto Restart features available on the LED driving board.As you can see, it comes from the VND5004 family.As a result, there are 16 terminations.In order to operate, 24 pins are used.As far as functions are concerned, the lighting driver has 1.This operation requires the maximum output current to be decreased to 100A.High efficiency is possible when the supply voltage is set to 13V.Surface Mount is mounted in the way of this lighting driver.The LED driving board is equipped with a total of 16 pins.4mOhm is the resistance of the lighting driver.This electrical component is included in the VIPower? series.It is self-contained in an econtainer with a capacity of Peripheral Drivers.Optimal efficiency requires a voltage of 13V.For its operation, a maximum current requirement of 6mA is required.
VND5004A-E Features
Supplied from 13V
Resistance of 4mOhm
VND5004A-E Applications
There are a lot of STMicroelectronics VND5004A-E Power Switches ICs applications.
- Hot Swaps
- PC Cards
- Wireless/Networking Cards
- Portable Devices
- Wearable Devices
- HDD, SSD
- Portable GPS Device
- PC Card Hot Swap
- Notebook and Tablet Computers
- Wireless Headsets
