VND5004ASP30-E
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 8 months ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 30-PowerSOP (0.630, 16.00mm Width) |
| Number of Pins | 30 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Series | VIPower™ |
| Feature | Auto Restart |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 30 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Resistance | 4mOhm |
| Subcategory | Peripheral Drivers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 13V |
| Terminal Pitch | 1mm |
| Base Part Number | VND5004 |
| Pin Count | 30 |
| Number of Outputs | 2 |
| Output Type | N-Channel |
| Max Output Current | 100A |
| Operating Supply Voltage | 13V |
| Interface | On/Off |
| Nominal Supply Current | 6mA |
| Output Configuration | High Side |
| Output Current | 100A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Max Supply Current | 6mA |
| Input Type | Non-Inverting |
| Turn On Delay Time | 25 μs |
| Switch Type | General Purpose |
| Output Current per Channel | 70A |
| Turn-Off Delay Time | 35 μs |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 4.5V~27V |
| Driver Number of Bits | 2 |
| Fault Protection | Current Limiting (Fixed), Over Temperature, Over Voltage |
| Output Peak Current Limit-Nom | 100A |
| Rds On (Typ) | 4m Ω (Max) |
| Built-in Protections | TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL |
| Height | 2.25mm |
| Length | 17.2mm |
| Width | 16mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
VND5004ASP30-E Overview
Tube is the way it's packaged.This package is included in 30-PowerSOP (0.630, 16.00mm Width).Mounting type Surface Mount is selected for the LED driving board.It owns General Purpose switch type.Ensure reliable operation by setting the temperature to -40°C~150°C TJ.The lighting driver is equipped with 2 outputs that can be used.To operate, it needs a supply voltage of Not Required.A maximum output voltage of N-Channel volts can be achieved by this LED driver.The lighting driver has Auto Restart features.The VND5004 family consists of this type.A total of 30 terminations have been found in it.The operation is performed through the 30 pins.It has 1 functions.In order to meet the operation criteria, the maximum output current drops to 100A.Using a voltage of 13V allows for high efficiency.It is mounted in the way of Surface Mount.The LED driver has a total of 30 pins.4mOhm is the resistance of the lighting driver.This electrical component can be found in the VIPower? series.In this case, the output current is set to 100A.This LED driver is self-contained in an econtainer with a capacity of Peripheral Drivers.A supply voltage of 13V is recommended for maximum efficiency.It operates at a maximum current of 6mA.
VND5004ASP30-E Features
Supplied from 13V
Resistance of 4mOhm
VND5004ASP30-E Applications
There are a lot of STMicroelectronics VND5004ASP30-E Power Switches ICs applications.
- Hot Swap
- Telecom and Network Systems
- USB Protection
- Solid State Drivers
- Portable GPS Device
- PDAs
- Portable Music Players
- HDD, SSD
- HDD and SSD
- Portable Devices
