VND5004ATR-E
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 7 months ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 24-PowerDFN |
| Number of Pins | 24 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Series | VIPower™ |
| Feature | Auto Restart |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Resistance | 4mOhm |
| Subcategory | Peripheral Drivers |
| Terminal Position | QUAD |
| Number of Functions | 1 |
| Supply Voltage | 13V |
| Terminal Pitch | 0.9mm |
| Current Rating | 100A |
| Base Part Number | VND5004 |
| Pin Count | 16 |
| JESD-30 Code | S-PQCC-N16 |
| Number of Outputs | 2 |
| Output Type | N-Channel |
| Max Output Current | 100A |
| Operating Supply Voltage | 13V |
| Interface | On/Off |
| Nominal Supply Current | 6mA |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Max Supply Current | 6mA |
| Input Type | Non-Inverting |
| Turn On Delay Time | 25 μs |
| Switch Type | General Purpose |
| Clamping Voltage | 52V |
| Output Current per Channel | 70A |
| Turn-Off Delay Time | 35 μs |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 4.5V~27V |
| Driver Number of Bits | 2 |
| Fault Protection | Current Limiting (Fixed), Over Temperature, Over Voltage |
| Output Peak Current Limit-Nom | 100A |
| Rds On (Typ) | 4m Ω (Max) |
| Built-in Protections | TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL |
| Output Current Flow Direction | SINK |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
VND5004ATR-E Overview
It is packaged in the form of a Tape & Reel (TR).The 24-PowerDFN package includes it.Surface Mount is the mounting type of the LED driver.It owns General Purpose switch type.It is recommended that the temperature be set to -40°C~150°C TJ for reliable operation.The LED driver has a total of 2 outputs.Operation is based on a supply voltage of Not Required.The maximum output voltage is N-Channel volts.There are Auto Restart features available on the LED driving board.The VND5004 family contains this object.It contains 16 terminations.For operation, 24 pins are used.It contains 1 functions.This results in the maximum output current dropping to 100A to meet the operation criteria.A supply voltage of 13V leads to high efficiency.The lighting driver is mounted in the direction of Surface Mount.As a result, it has a total of 16 pins.Currently, the LED driving board has a resistance of 4mOhm ohms.A component of this type is included in the VIPower? series.A container with a capacity of Peripheral Drivers contains this self-contained lighting driver.It is recommended that the supply voltage be set at 13V in order to achieve maximum efficiency.The maximum current required for its operation is 6mA.
VND5004ATR-E Features
Supplied from 13V
Resistance of 4mOhm
VND5004ATR-E Applications
There are a lot of STMicroelectronics VND5004ATR-E Power Switches ICs applications.
- Wireless Headsets
- USB Power Distribution
- PC Card Hot Swap
- Hot Swap
- Storage Drives
- USB Protection
- Portable GPS Device
- Storage (HDDs, SSDs)
- Portable Video Game Players
- Set-Top Boxes
