VND5012AK-E
| Parameters | |
|---|---|
| Lifecycle Status | ACTIVE (Last Updated: 8 months ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 24-PowerBSOP (0.295, 7.50mm Width) |
| Number of Pins | 24 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tray |
| Series | VIPower™ |
| JESD-609 Code | e3 |
| Feature | Auto Restart |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 24 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Resistance | 12mOhm |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | Peripheral Drivers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 2 |
| Supply Voltage | 13V |
| Terminal Pitch | 0.8mm |
| Current Rating | 6mA |
| Base Part Number | VND5012 |
| Pin Count | 24 |
| Output Type | N-Channel |
| Max Output Current | 60A |
| Operating Supply Voltage | 13V |
| Supply Voltage-Max (Vsup) | 36V |
| Power Supplies | 8/36V |
| Interface | On/Off |
| Nominal Supply Current | 6mA |
| Output Configuration | High Side |
| Output Current | 40A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Max Supply Current | 6mA |
| Input Type | Non-Inverting |
| Turn On Delay Time | 15 μs |
| Switch Type | General Purpose |
| Output Current per Channel | 42A |
| Turn-Off Delay Time | 40 μs |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 4.5V~36V |
| Fault Protection | Current Limiting (Fixed), Over Temperature, Over Voltage |
| Number of Drivers | 2 |
| Rds On (Typ) | 12m Ω (Max) |
| Built-in Protections | TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL; UNDER VOLTAGE |
| Height | 2.15mm |
| Length | 10.4mm |
| Width | 7.6mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
VND5012AK-E Overview
It is packaged in the manner of a Tray.There is a package for it in the 24-PowerBSOP (0.295, 7.50mm Width) package.This LED driving board is mounted using the mounting type Surface Mount.It owns General Purpose switch type.In order to guarantee reliable performance, the temperature should be set to -40°C~150°C TJ.To operate, it needs a supply voltage of Not Required.There is a maximum output voltage of N-Channel volts.It has a total of Auto Restart features.As you can see, it comes from the VND5012 family.A total of 24 terminations have been recorded.In order to operate, the 24 pins are used.As far as functions are concerned, the lighting driver has 2.Maximum output current falls to 60A when operation criteria are met.It is possible to achieve a high level of efficiency with a supply voltage of 13V.In this case, it is mounted in the way of Surface Mount.A total of 24 pins are present on it.It has 12mOhm resistance.This electrical component is included in the VIPower? series.This results in a 40A output current.This LED driver is self-contained in an econtainer with a capacity of Peripheral Drivers.The maximum supply voltage is set to 36V.This part has a power supply of 8/36V.A supply voltage of 13V is recommended for maximum efficiency.There is a maximum current requirement of 6mA for its operation.There are 2 drivers available for this part.
VND5012AK-E Features
Supplied from 13V
Resistance of 12mOhm
VND5012AK-E Applications
There are a lot of STMicroelectronics VND5012AK-E Power Switches ICs applications.
- HDD, SSD
- Portable Video Game Players
- PC Card Hot Swap
- HDD and SSD
- Wireless Modem Data Cards
- Hot Swap
- Storage Drives
- Hot Swaps
- Storage (HDDs, SSDs)
- Wearable Devices
