Parameters |
Lead Free |
Lead Free |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 7 months ago) |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
24-PowerBSOP (0.295, 7.50mm Width) |
Number of Pins |
24 |
Operating Temperature |
-40°C~150°C TJ |
Packaging |
Tape & Reel (TR) |
Series |
VIPower™ |
JESD-609 Code |
e3 |
Feature |
Auto Restart |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
3 (168 Hours) |
Number of Terminations |
24 |
ECCN Code |
EAR99 |
Resistance |
12mOhm |
Terminal Finish |
Matte Tin (Sn) |
Subcategory |
Peripheral Drivers |
Technology |
CMOS |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
2 |
Supply Voltage |
13V |
Terminal Pitch |
0.8mm |
Base Part Number |
VND5012 |
Pin Count |
24 |
Number of Outputs |
2 |
Output Type |
N-Channel |
Max Output Current |
40A |
Operating Supply Voltage |
13V |
Supply Voltage-Max (Vsup) |
36V |
Power Supplies |
8/36V |
Interface |
On/Off |
Nominal Supply Current |
6mA |
Output Configuration |
High Side |
Output Current |
40A |
Voltage - Supply (Vcc/Vdd) |
Not Required |
Max Supply Current |
6mA |
Input Type |
Non-Inverting |
Turn On Delay Time |
15 μs |
Switch Type |
General Purpose |
Output Current per Channel |
42A |
Nominal Input Voltage |
13V |
Turn-Off Delay Time |
40 μs |
Ratio - Input:Output |
1:1 |
Voltage - Load |
4.5V~36V |
Driver Number of Bits |
2 |
Fault Protection |
Current Limiting (Fixed), Over Temperature, Over Voltage |
Rds On (Typ) |
12m Ω (Max) |
Built-in Protections |
TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL; UNDER VOLTAGE |
Length |
10.3mm |
Width |
7.5mm |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
VND5012AKTR-E Overview
The package is in the form of a Tape & Reel (TR).This file is included in package 24-PowerBSOP (0.295, 7.50mm Width).The lighting driver has the mounting type Surface Mount.The switch type of this switch is General Purpose.The temperature should be set to -40°C~150°C TJ to ensure reliable functioning.The LED driver has 2 outputs.A supply voltage of Not Required is required for it to operate.The maximum output voltage is N-Channel volts.As far as features are concerned, the LED driving board has Auto Restart.It is a member of the VND5012 family.It contains 24 terminations.24 pins are used for operation.It is important to note that the LED driving board has 2 functions.This operation requires the maximum output current to be decreased to 40A.It is possible to obtain high efficiency with a supply voltage of 13V.In this case, it is mounted in the way of Surface Mount.The LED driving board is equipped with a total of 24 pins.12mOhm is the resistance of the lighting driver.These electrical components are part of the VIPower? series.As a result, the output current is set to 40A.Self-contained in an econtainer with a capacity of Peripheral Drivers, this LED driver is self-contained.This LED driver is configured to have a maximum supply voltage of 36V (Vsup).A 8/36V power supply is used by the part.It is recommended to set the supply voltage to 13V for optimum efficiency.6mA is the maximum current required to operate it.
VND5012AKTR-E Features
Supplied from 13V
Resistance of 12mOhm
VND5012AKTR-E Applications
There are a lot of STMicroelectronics VND5012AKTR-E Power Switches ICs applications.
- PDAs
- PC Cards
- Storage Drives
- Hot Swap
- Various applications equipped with buttons
- HDD, SSD
- USB3.1 Power Delivery
- Set-Top Boxes
- Hot Swaps
- Hot-Swap Systems