VND5025AK-E
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 7 months ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 24-PowerBSOP (0.295, 7.50mm Width) |
| Number of Pins | 24 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tray |
| Series | VIPower™ |
| JESD-609 Code | e3 |
| Feature | Auto Restart |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Resistance | 25mOhm |
| Terminal Finish | MATTE TIN |
| Subcategory | Peripheral Drivers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 225 |
| Number of Functions | 2 |
| Supply Voltage | 13V |
| Terminal Pitch | 0.8mm |
| Current Rating | 57A |
| Base Part Number | VND5025 |
| Pin Count | 24 |
| Output Type | N-Channel |
| Max Output Current | 41A |
| Operating Supply Voltage | 13V |
| Supply Voltage-Max (Vsup) | 36V |
| Power Supplies | 8/36V |
| Interface | On/Off |
| Current - Output (Max) | 29A |
| Nominal Supply Current | 3mA |
| Output Configuration | High Side |
| Output Current | 40A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Max Supply Current | 5μA |
| Input Type | Non-Inverting |
| Turn On Delay Time | 35 μs |
| Switch Type | General Purpose |
| Turn-Off Delay Time | 50 μs |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 4.5V~36V |
| Fault Protection | Current Limiting (Fixed), Over Temperature, Over Voltage |
| Number of Drivers | 2 |
| Rds On (Typ) | 25m Ω (Max) |
| Built-in Protections | TRANSIENT; THERMAL; UNDER VOLTAGE |
| Height | 2.4mm |
| Length | 10.5mm |
| Width | 7.6mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
VND5025AK-E Overview
The package is in the form of a Tray.It's included in the 24-PowerBSOP (0.295, 7.50mm Width) package.The lighting driver has the mounting type Surface Mount.It owns General Purpose switch type.To ensure reliable operation, set the temperature to -40°C~150°C TJ.The LED driving board operates with a supply voltage of Not Required.The maximum output voltage of this LED driver is N-Channel volts.This LED driving board is equipped with Auto Restart features in order for it to be useful.It is part of the VND5025 family of LED drivers.It has a total of 24 terminations.The operation is performed through the 24 pins.It is important to note that the LED driving board has 2 functions.The maximum output of the LED driving board is 29AV.This results in the maximum output current dropping to 41A to meet the operation criteria.A supply voltage of 13V leads to high efficiency.This lighting driver is mounted in the way of Surface Mount.The LED driving board is equipped with a total of 24 pins.Lighting drivers with 25mOhm resistance are used.There is an electrical component included in the VIPower? series.It is set to 40A in this case.A self-contained econtainer holding Peripheral Drivers capacity contains this lighting driver.This LED driver is configured to have a maximum supply voltage of 36V (Vsup).It has a power supply of 8/36V.Optimal efficiency requires a voltage of 13V.A maximum current requirement of 5μA is required for its operation.2 drivers are available for the part.
VND5025AK-E Features
Supplied from 13V
Resistance of 25mOhm
VND5025AK-E Applications
There are a lot of STMicroelectronics VND5025AK-E Power Switches ICs applications.
- USB Protection
- HDD and SSD
- Handheld Devices
- USB Ports/Hubs
- Hot Swaps
- Wireless Headsets
- Hard Disk Drives
- Notebook and Tablet Computers
- USB Power Distribution
- USB Power Distribution
