VND5025AKTR-E
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 7 months ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 24-PowerBSOP (0.295, 7.50mm Width) |
| Number of Pins | 24 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Series | VIPower™ |
| JESD-609 Code | e3 |
| Feature | Auto Restart |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Resistance | 25MOhm |
| Terminal Finish | Tin (Sn) |
| Subcategory | Peripheral Drivers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 13V |
| Terminal Pitch | 0.8mm |
| Current Rating | 57A |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | VND5025 |
| Pin Count | 24 |
| Output Type | N-Channel |
| Max Output Current | 29A |
| Operating Supply Voltage | 13V |
| Supply Voltage-Max (Vsup) | 36V |
| Power Supplies | 8/36V |
| Interface | On/Off |
| Nominal Supply Current | 5μA |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Max Supply Current | 5μA |
| Input Type | Non-Inverting |
| Turn On Delay Time | 20 μs |
| Switch Type | General Purpose |
| Turn-Off Delay Time | 50 μs |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 4.5V~36V |
| Fault Protection | Current Limiting (Fixed), Over Temperature, Over Voltage |
| Number of Drivers | 2 |
| Rds On (Typ) | 25m Ω (Max) |
| Built-in Protections | TRANSIENT; THERMAL; UNDER VOLTAGE |
| Output Current Flow Direction | SOURCE |
| Length | 10.3mm |
| Width | 7.5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
VND5025AKTR-E Overview
Tape & Reel (TR) is the way it's packaged.In the 24-PowerBSOP (0.295, 7.50mm Width) package, it is included.It has been mounted as Surface Mount on the LED driver.The switch type is General Purpose.To ensure reliable performance, the temperature should be set to -40°C~150°C TJ.The LED driving board is powered by a voltage of Not Required.It has a maximum output voltage of N-Channel volts.As far as features are concerned, the LED driving board has Auto Restart.There is a VND5025 family of things that it belongs to.As a result, there are 24 terminations.The 24 pins are used to operate the LED driver.It has 2 functions.It is necessary to reduce the maximum output current to 29A to meet the operation criteria.It is possible to achieve a high level of efficiency with a supply voltage of 13V.In this case, it is mounted in the way of Surface Mount.As a result, it has a total of 24 pins.In this case, there is 25MOhm resistance in the LED driving board.The VIPower? series includes this electrical component.A self-contained LED driver with a capacity of Peripheral Drivers is contained in an econtainer.This LED driver is configured to have a maximum supply voltage of 36V (Vsup).A 8/36V power supply is used by the part.It is recommended that the supply voltage be set at 13V in order to achieve maximum efficiency.This system has a maximum current requirement of 5μA.It has 2 drivers.
VND5025AKTR-E Features
Supplied from 13V
Resistance of 25MOhm
VND5025AKTR-E Applications
There are a lot of STMicroelectronics VND5025AKTR-E Power Switches ICs applications.
- USB Power Distribution
- Storage Drives
- Hot Swaps
- PC Card Hot Swap
- Portable Music Players
- Gaming
- Set-top-box
- Wearable Devices
- Wireless Modem Data Cards
- Wireless Headsets
