VND5025LAKTR-E
| Parameters | |
|---|---|
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Terminal Finish | MATTE TIN |
| Subcategory | Peripheral Drivers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 225 |
| Number of Functions | 1 |
| Supply Voltage | 13V |
| Terminal Pitch | 0.8mm |
| Base Part Number | VND5025 |
| Pin Count | 24 |
| Number of Outputs | 2 |
| Output Type | N-Channel |
| Max Output Current | 40mA |
| Operating Supply Voltage | 13V |
| Supply Voltage-Max (Vsup) | 36V |
| Power Supplies | 8/36V |
| Interface | On/Off |
| Nominal Supply Current | 6mA |
| Output Configuration | High Side |
| Output Current | 40A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Max Supply Current | 6mA |
| Input Type | Non-Inverting |
| Turn On Delay Time | 35 μs |
| Switch Type | General Purpose |
| Turn-Off Delay Time | 50 μs |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 4.5V~36V |
| Driver Number of Bits | 2 |
| Fault Protection | Current Limiting (Fixed), Over Temperature, Over Voltage |
| Rds On (Typ) | 25m Ω (Max) |
| Built-in Protections | TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL; UNDER VOLTAGE |
| Length | 10.3mm |
| Width | 7.5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 24-PowerBSOP (0.295, 7.50mm Width) |
| Number of Pins | 24 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Series | VIPower™ |
| JESD-609 Code | e3 |
| Feature | Auto Restart |
| Pbfree Code | yes |
VND5025LAKTR-E Overview
A Tape & Reel (TR) is used to package it.The 24-PowerBSOP (0.295, 7.50mm Width) package contains it.In this case, the LED driving board is mounted as Surface Mount.General Purpose is the switch type it owns.To ensure reliable operation, set the temperature to -40°C~150°C TJ.The LED driver is equipped with 2 outputs.A supply voltage of Not Required is required for it to operate.A maximum output voltage of N-Channel volts can be obtained with this LED driver.Features of the lighting driver are Auto Restart.The VND5025 family consists of this type.There are 24 terminations in it.For operation, we use the 24 pins.As far as functions are concerned, the lighting driver has 1.Maximum output current falls to 40mA when operation criteria are met.High efficiency is possible at 13V supply voltage.It is positioned in the direction of Surface Mount.In total, it has 24 pins.This electrical component is part of the VIPower? series.As a result, the output current is set to 40A.The LED driver is packaged in an econtainer with a capacity of Peripheral Drivers.In this case, Vsup (maximum supply voltage) is set to 36V.In this part, the power supply is set to 8/36V.It is recommended to set the supply voltage to 13V for optimum efficiency.It requires 6mA current to operate.
VND5025LAKTR-E Features
Supplied from 13V
VND5025LAKTR-E Applications
There are a lot of STMicroelectronics VND5025LAKTR-E Power Switches ICs applications.
- Low Voltage I/O System Power
- USB3.1 Power Delivery
- Portable GPS Device
- Wearable Devices
- Portable/Handheld Devices
- Smartphone and PDA
- Notebook and Tablet Computers
- HDD, SSD
- Set-top-box
- USB Ports/Hubs
