VND5050AJTR-E
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 7 months ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 12-PowerLSOP (0.154, 3.90mm Width) |
| Number of Pins | 12 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Series | VIPower™ |
| JESD-609 Code | e4 |
| Feature | Auto Restart |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 12 |
| ECCN Code | EAR99 |
| Terminal Finish | NICKEL PALLADIUM GOLD |
| Subcategory | Peripheral Drivers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 13V |
| Terminal Pitch | 0.8mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | VND5050 |
| Pin Count | 12 |
| Output Type | N-Channel |
| Max Output Current | 12A |
| Supply Voltage-Max (Vsup) | 36V |
| Power Supplies | 8/36V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Interface | On/Off |
| Operating Supply Current | 3mA |
| Nominal Supply Current | 3mA |
| Output Configuration | High Side |
| Output Current | 18A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Max Supply Current | 5μA |
| Input Type | Non-Inverting |
| Turn On Delay Time | 25 μs |
| Switch Type | General Purpose |
| Turn-Off Delay Time | 35 μs |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 4.5V~36V |
| Fault Protection | Current Limiting (Fixed), Over Temperature, Over Voltage |
| Number of Drivers | 2 |
| Rds On (Typ) | 50m Ω (Max) |
| Built-in Protections | TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL; UNDER VOLTAGE |
| Length | 4.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
VND5050AJTR-E Overview
Tape & Reel (TR) is the way it's packaged.There is a package for it in the 12-PowerLSOP (0.154, 3.90mm Width) package.This LED driving board is mounted using the mounting type Surface Mount.It owns the General Purpose switch type.Keeping the temperature at -40°C~150°C TJ ensures reliable operation.Operation is based on Not Required supply voltage.A maximum output voltage of N-Channel volts can be obtained with this LED driver.This LED driving board is equipped with Auto Restart features in order for it to be useful.It is a member of the VND5050 family.The termination count is 12.The 12 pins are used for the operation of the system.There are 1 functions of the LED driver.This operation requires the maximum output current to be decreased to 12A.The supply voltage can be 13V for high efficiency.In this case, it is mounted in the way of Surface Mount.As a result, it has a total of 12 pins.It belongs to the VIPower? series.It is set to 18A in this case.The LED driver is self-contained in an econtainer with Peripheral Drivers capacity.A maximum supply voltage of 36V is set in Vsup.In order to operate normally, the supply voltage (Vsup) must remain above 4.5V.In this part, the power supply is set to 8/36V.For its operation, a current of 5μA is required.There are 2 drivers associated with the part.
VND5050AJTR-E Features
Supplied from 13V
VND5050AJTR-E Applications
There are a lot of STMicroelectronics VND5050AJTR-E Power Switches ICs applications.
- Wireless Headsets
- USB Power Distribution
- USB3.1 Power Delivery
- Mobile Communication Devices
- Portable GPS
- Hot Swaps
- Solid State Drivers
- Hot Swap
- USB Ports/Hubs
- Notebook and Tablet Computers
