VND5050AK-E
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 8 months ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | PowerSSO-24 |
| Number of Pins | 24 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tray |
| Series | VIPower™ |
| JESD-609 Code | e3 |
| Feature | Auto Restart |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Terminal Finish | MATTE TIN |
| Subcategory | Peripheral Drivers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 225 |
| Number of Functions | 1 |
| Supply Voltage | 13V |
| Terminal Pitch | 0.8mm |
| Base Part Number | VND5050 |
| Pin Count | 24 |
| Output Type | N-Channel |
| Max Output Current | 12A |
| Supply Voltage-Max (Vsup) | 36V |
| Power Supplies | 8/36V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Interface | On/Off |
| Nominal Supply Current | 3mA |
| Output Configuration | High Side |
| Output Current | 18A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Max Supply Current | 5μA |
| Input Type | Non-Inverting |
| Turn On Delay Time | 25 μs |
| Switch Type | General Purpose |
| Turn-Off Delay Time | 35 μs |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 4.5V~36V |
| Fault Protection | Current Limiting (Fixed), Over Temperature, Over Voltage |
| Number of Drivers | 2 |
| Rds On (Typ) | 50m Ω (Max) |
| Built-in Protections | TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL; UNDER VOLTAGE |
| Height | 2.4mm |
| Length | 10.5mm |
| Width | 7.6mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
VND5050AK-E Overview
The package is in the form of a Tray.The PowerSSO-24 package contains it.This lighting drivere has a mounting type of Surface Mount.It owns the General Purpose switch type.It is recommended that the temperature be set to -40°C~150°C TJ for reliable performance.The LED driving board is powered by a voltage of Not Required.There is a maximum output voltage of N-Channel volts on this LED driver.It has a total of Auto Restart features.This object belongs to the VND5050 family.It contains 24 terminations.In order to operate, 24 pins are used.As far as the lighting driver is concerned, there are 1 functions.To meet the operation criteria, the maximum output current drops to 12A.High efficiency is possible at 13V supply voltage.It is mounted in the way of Surface Mount.As a result, it has a total of 24 pins.It is part of the VIPower? series.When this is the case, the output current is set to 18A.The LED driver is self-contained in an econtainer with Peripheral Drivers capacity.A maximum supply voltage of 36V is set in Vsup.In order for this lighting driver to operate normally, the supply voltage (Vsup) should remain above 4.5V.This part is powered by 8/36V.For its operation, a maximum current requirement of 5μA is required.A total of 2 drivers are included in the part.
VND5050AK-E Features
Supplied from 13V
VND5050AK-E Applications
There are a lot of STMicroelectronics VND5050AK-E Power Switches ICs applications.
- PDAs
- Gaming
- Notebook PC
- Hard Disk Drives
- Wireless/Networking Cards
- Wireless Modem Data Cards
- Mobile Communication Devices
- PC Cards
- Notebook and Tablet Computers
- Handheld Devices
