VND5050J-E
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 8 months ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | PowerSSO-12 |
| Number of Pins | 12 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Series | VIPower™ |
| JESD-609 Code | e3 |
| Feature | Auto Restart, Status Flag |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 12 |
| ECCN Code | EAR99 |
| Resistance | 50MOhm |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Peripheral Drivers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 13V |
| Terminal Pitch | 0.8mm |
| Current Rating | 18A |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | VND5050 |
| Pin Count | 12 |
| Number of Outputs | 2 |
| Output Type | N-Channel |
| Max Output Current | 18A |
| Operating Supply Voltage | 13V |
| Supply Voltage-Max (Vsup) | 36V |
| Power Supplies | 8/36V |
| Interface | On/Off |
| Current - Output (Max) | 12A |
| Nominal Supply Current | 6mA |
| Output Configuration | High Side |
| Output Current | 18A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Max Supply Current | 6mA |
| Input Type | Non-Inverting |
| Turn On Delay Time | 20 μs |
| Switch Type | General Purpose |
| Clamping Voltage | 52V |
| Nominal Input Voltage | 13V |
| Turn-Off Delay Time | 40 μs |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 4.5V~36V |
| Driver Number of Bits | 2 |
| Fault Protection | Current Limiting (Fixed), Open Load Detect, Over Temperature, Over Voltage |
| Rds On (Typ) | 50m Ω (Max) |
| Built-in Protections | TRANSIENT; OVER CURRENT; THERMAL; UNDER VOLTAGE |
| Height | 1.62mm |
| Length | 5mm |
| Width | 4mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
VND5050J-E Overview
It is package in Tube case.In the PowerSSO-12 package, it is included.It has been mounted as Surface Mount on the LED driver.There is a General Purpose switch type associated with it.In order to guarantee reliable performance, the temperature should be set to -40°C~150°C TJ.It is possible to use 2 outputs in the lighting driver.A supply voltage of Not Required is required for it to operate.It has a maximum output voltage of N-Channel volts.Currently, the LED driving board is equipped with Auto Restart, Status Flag features.As you can see, it comes from the VND5050 family.As a result, there are 12 terminations.The 12 pins are used for the operation of the system.It is important to note that the LED driving board has 1 functions.The LED driver output is limited to 12AV.The maximum output current is reduced to 18A to meet the operation criteria.It is possible to obtain high efficiency with a supply voltage of 13V.Surface Mount is mounted in the way.As a result, it has a total of 12 pins.It has a resistance of 50MOhm.The VIPower? series includes this electrical component.This case results in a 18A output current.Self-contained LED driver with Peripheral Drivers capacity in an econtainer.The Vsup value (maximum supply voltage) is set to 36V.This part is powered by 8/36V.In order to maximize efficiency, the supply voltage should be set at 13V.The maximum current required for its operation is 6mA.
VND5050J-E Features
Supplied from 13V
Resistance of 50MOhm
VND5050J-E Applications
There are a lot of STMicroelectronics VND5050J-E Power Switches ICs applications.
- Smart Phones, Feature Phones
- Hot Swap
- Portable Music Players
- PC Card Hot Swap
- USB3.1 Power Delivery
- USB Ports/Hubs
- Telecom and Network Systems
- Portable GPS
- Hot-Swap Systems
- Notebook PC
