VND5050JTR-E
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 7 months ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 12-PowerLSOP (0.154, 3.90mm Width) |
| Number of Pins | 12 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Series | VIPower™ |
| JESD-609 Code | e3 |
| Feature | Auto Restart, Status Flag |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 12 |
| ECCN Code | EAR99 |
| Resistance | 50mOhm |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | Peripheral Drivers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 13V |
| Terminal Pitch | 0.8mm |
| Current Rating | 24A |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | VND5050 |
| Pin Count | 12 |
| Output Type | N-Channel |
| Max Output Current | 18A |
| Operating Supply Voltage | 13V |
| Supply Voltage-Max (Vsup) | 36V |
| Power Supplies | 8/36V |
| Interface | On/Off |
| Nominal Supply Current | 6mA |
| Output Configuration | High Side |
| Output Current | 18A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Max Supply Current | 6mA |
| Input Type | Non-Inverting |
| Turn On Delay Time | 20 μs |
| Switch Type | General Purpose |
| Output Current per Channel | 12A |
| Turn-Off Delay Time | 40 μs |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 4.5V~36V |
| Fault Protection | Current Limiting (Fixed), Open Load Detect, Over Temperature, Over Voltage |
| Number of Drivers | 2 |
| Rds On (Typ) | 50m Ω (Max) |
| Built-in Protections | TRANSIENT; OVER CURRENT; THERMAL; UNDER VOLTAGE |
| Length | 4.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
VND5050JTR-E Overview
It is packaged in the manner of a Tape & Reel (TR).It is included in the package 12-PowerLSOP (0.154, 3.90mm Width).The LED driver is mounted as Surface Mount.The switch type of this switch is General Purpose.It is recommended that the temperature be set to -40°C~150°C TJ for reliable operation.To operate, it needs a supply voltage of Not Required.It has a maximum output voltage of N-Channel volts.Auto Restart, Status Flag features are available on the lighting driver.It is part of the VND5050 family of LED drivers.It consists of 12 terminations in total.The 12 pins are used to operate the LED driver.The LED driving board has a total of 1 functions.The maximum output current is reduced to 18A to meet the operation criteria.With a supply voltage of 13V, high efficiency is possible.The LED driving board is mounted in the way of Surface Mount.There are 12 pins in total on this board.Currently, the LED driving board has 50mOhm resistance.It belongs to the VIPower? series.The output current is set to 18A in this case.A self-contained econtainer holding Peripheral Drivers capacity contains this lighting driver.In this case, Vsup (maximum supply voltage) is set to 36V.8/36V is the power supply of the part.In order to maximize efficiency, the supply voltage should be set to 13V.For its operation, a maximum current requirement of 6mA is required.It is equipped with 2 drivers.
VND5050JTR-E Features
Supplied from 13V
Resistance of 50mOhm
VND5050JTR-E Applications
There are a lot of STMicroelectronics VND5050JTR-E Power Switches ICs applications.
- Storage (HDDs, SSDs)
- USB Power Distribution
- Wearable Devices
- Hot-Swap Systems
- PC Card Hot Swap
- HDD and SSD
- Portable Video Game Players
- Set-top-box
- Wireless Modem Data Cards
- Storage Drives
