VND5050K-E
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | NRND (Last Updated: 8 months ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | PowerSSO-24 |
| Number of Pins | 24 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tray |
| Series | VIPower™ |
| JESD-609 Code | e3 |
| Feature | Auto Restart, Status Flag |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Resistance | 50mOhm |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Peripheral Drivers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 13V |
| Terminal Pitch | 0.8mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | VND5050 |
| Pin Count | 24 |
| Number of Outputs | 2 |
| Output Type | N-Channel |
| Max Output Current | 18A |
| Operating Supply Voltage | 13V |
| Supply Voltage-Max (Vsup) | 36V |
| Power Supplies | 8/36V |
| Interface | On/Off |
| Nominal Supply Current | 6mA |
| Output Configuration | High Side |
| Output Current | 18A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Max Supply Current | 6mA |
| Input Type | Non-Inverting |
| Turn On Delay Time | 20 μs |
| Switch Type | General Purpose |
| Output Current per Channel | 12A |
| Turn-Off Delay Time | 40 μs |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 4.5V~36V |
| Driver Number of Bits | 2 |
| Fault Protection | Current Limiting (Fixed), Open Load Detect, Over Temperature, Over Voltage |
| Rds On (Typ) | 50m Ω (Max) |
| Built-in Protections | TRANSIENT; OVER CURRENT; THERMAL; UNDER VOLTAGE |
| Height | 2.4mm |
| Length | 10.5mm |
| Width | 7.6mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
VND5050K-E Overview
It's?packaged?in?the way?of?a?Tray.There is a package for it in the PowerSSO-24 package.In this case, the LED driving board is mounted as Surface Mount.It owns the General Purpose switch type.In order to guarantee reliable performance, the temperature should be set to -40°C~150°C TJ.The lighting driver has a total of 2 outputs that are available for use.To operate, it needs a supply voltage of Not Required.The maximum output voltage is N-Channel volts.Auto Restart, Status Flag features are available on the lighting driver.It comes under the family of VND5050.It has a total of 24 terminations.24 pins are used for operation.As far as the lighting driver is concerned, there are 1 functions.To meet the operation criteria, the maximum output current drops to 18A.Supply voltages of 13V allow for high efficiency.It is positioned in the direction of Surface Mount.The LED driver has a total of 24 pins.In this case, there is 50mOhm resistance in the LED driving board.It is part of the VIPower? series.In this case, the output current is set to 18A.A self-contained econtainer holding Peripheral Drivers capacity contains this lighting driver.The maximum supply voltage for this lighting driver is set to 36V (Vsup).8/36V is the power supply of the part.The supply voltage should be set at 13V for best efficiency.This system has a maximum current requirement of 6mA.
VND5050K-E Features
Supplied from 13V
Resistance of 50mOhm
VND5050K-E Applications
There are a lot of STMicroelectronics VND5050K-E Power Switches ICs applications.
- Hot Swap
- Smartphone and PDA
- Various applications equipped with buttons
- HDD and SSD
- Notebook PC
- PC Cards
- Wireless Headsets
- Telecom and Network Systems
- Portable Music Players
- Wireless/Networking Cards
