VND5050KTR-E
| Parameters | |
|---|---|
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Peripheral Drivers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 13V |
| Terminal Pitch | 0.8mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | VND5050 |
| Pin Count | 24 |
| Number of Outputs | 2 |
| Output Type | N-Channel |
| Max Output Current | 18A |
| Operating Supply Voltage | 13V |
| Supply Voltage-Max (Vsup) | 36V |
| Power Supplies | 8/36V |
| Interface | On/Off |
| Nominal Supply Current | 6mA |
| Output Configuration | High Side |
| Output Current | 18A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Max Supply Current | 6mA |
| Input Type | Non-Inverting |
| Turn On Delay Time | 20 μs |
| Switch Type | General Purpose |
| Output Current per Channel | 12A |
| Turn-Off Delay Time | 40 μs |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 4.5V~36V |
| Driver Number of Bits | 2 |
| Fault Protection | Current Limiting (Fixed), Open Load Detect, Over Temperature, Over Voltage |
| Rds On (Typ) | 50m Ω (Max) |
| Built-in Protections | TRANSIENT; OVER CURRENT; THERMAL; UNDER VOLTAGE |
| Length | 10.3mm |
| Width | 7.5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | NRND (Last Updated: 7 months ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 24-SOP (0.295, 7.50mm Width) Exposed Pad |
| Number of Pins | 24 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Series | VIPower™ |
| JESD-609 Code | e3 |
| Feature | Auto Restart, Status Flag |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Resistance | 50mOhm |
VND5050KTR-E Overview
Tape & Reel (TR) is how it's packaged.The 24-SOP (0.295, 7.50mm Width) Exposed Pad package contains it.The lighting driver is mounted in the Surface Mount position.There is a switch type of General Purpose.It is recommended to set the temperature to -40°C~150°C TJ in order to ensure reliable operation.There is a default setting of 2 for output.The LED driving board operates at Not Required volts.A maximum voltage of N-Channel volts is available from the output of this LED driver.A lighting driver with Auto Restart, Status Flag features is available.It belongs to the VND5050 family.A total of 24 terminations have been recorded.In order to operate, 24 pins are used.Currently, there are 1 functions associated with the lighting driver.As a result, the maximum output current is reduced to 18A in order to meet the operation requirements.High efficiency is possible when the supply voltage is set to 13V.As a result, it is mounted in the manner of Surface Mount.24 pins are connected to it in total.In this case, there is 50mOhm resistance in the LED driving board.Electrical components such as this are included in the VIPower? series.The output current is set to 18A in this case.Self-contained LED driver with Peripheral Drivers capacity in an econtainer.In this LED driver, the maximum supply voltage is configured to be 36V (Vsup).In this case, the power supply is 8/36V.The supply voltage should be set at 13V for best efficiency.It has a maximum current requirement of 6mA.
VND5050KTR-E Features
Supplied from 13V
Resistance of 50mOhm
VND5050KTR-E Applications
There are a lot of STMicroelectronics VND5050KTR-E Power Switches ICs applications.
- Hot-Swap Systems
- Mobile Communication Devices
- Storage Drives
- Smart Phones, Feature Phones
- Storage (HDDs, SSDs)
- Wearable Devices
- Hot Swap
- USB3.1 Power Delivery
- Wireless/Networking Cards
- Portable/Handheld Devices
