VND5160AJTR-E
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 7 months ago) |
| Mounting Type | Surface Mount |
| Package / Case | 12-PowerLSOP (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 12 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Series | VIPower™ |
| JESD-609 Code | e3 |
| Feature | Auto Restart |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 12 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin (Sn) |
| Subcategory | Peripheral Drivers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 13V |
| Terminal Pitch | 0.8mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | VND5160 |
| Pin Count | 12 |
| Number of Outputs | 2 |
| Qualification Status | Not Qualified |
| Output Type | N-Channel |
| Max Output Current | 3.8A |
| Supply Voltage-Max (Vsup) | 36V |
| Power Supplies | 8/36V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Interface | On/Off |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Nominal Input Voltage | 13V |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 4.5V~36V |
| Driver Number of Bits | 2 |
| Fault Protection | Current Limiting (Fixed), Over Temperature, Over Voltage |
| Turn On Time | 10 µs |
| Rds On (Typ) | 160m Ω (Max) |
| Turn Off Time | 15 µs |
| Built-in Protections | TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL; UNDER VOLTAGE |
| Output Current Flow Direction | SINK |
| Length | 4.9mm |
| Width | 3.9mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
VND5160AJTR-E Overview
The package is in the form of a Tape & Reel (TR).This file is included in package 12-PowerLSOP (0.154, 3.90mm Width).The lighting driver is mounted in the Surface Mount position.There is a switch type of General Purpose.Ensure reliable operation by setting the temperature to -40°C~150°C TJ.In this LED driver, there are no outputs available.The LED driving board is powered by a voltage of Not Required.A maximum voltage of N-Channel volts is available from the output of this LED driver.As far as features are concerned, the LED driving board has Auto Restart.It belongs to the family VND5160.As a result, there are 12 terminations.It is necessary to use the 12 pins in order to operate the LED driver.It contains 1 functions.Maximum output current falls to 3.8A when operation criteria are met.The supply voltage can be 13V for high efficiency.There are 12 pins in total on this board.There is an electrical component included in the VIPower? series.It is self-contained in an econtainer with a capacity of Peripheral Drivers.In this case, Vsup (maximum supply voltage) is set to 36V.The supply voltage (Vsup) should be kept above 4.5V for normal operation.There is a voltage supply of 8/36V volts on this part.
VND5160AJTR-E Features
Supplied from 13V
VND5160AJTR-E Applications
There are a lot of STMicroelectronics VND5160AJTR-E Power Switches ICs applications.
- Smart Phones, Feature Phones
- PDAs
- Solid-State Drives
- Solid State Drivers
- Portable GPS Device
- HDD and SSD
- Hot Swaps
- Wireless Headsets
- Notebook PC
- Hot Swap
