Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 8 months ago) |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
PowerSSO-12 |
Number of Pins |
12 |
Operating Temperature |
-40°C~150°C TJ |
Packaging |
Tube |
Series |
VIPower™ |
Feature |
Auto Restart, Status Flag |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
3 (168 Hours) |
Number of Terminations |
12 |
ECCN Code |
EAR99 |
Resistance |
160mOhm |
Subcategory |
Peripheral Drivers |
Technology |
CMOS |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Number of Functions |
2 |
Supply Voltage |
13V |
Terminal Pitch |
0.8mm |
Base Part Number |
VND5160 |
Pin Count |
12 |
Number of Outputs |
2 |
Output Type |
N-Channel |
Max Output Current |
5A |
Operating Supply Voltage |
36V |
Interface |
On/Off |
Nominal Supply Current |
6mA |
Output Configuration |
High Side |
Voltage - Supply (Vcc/Vdd) |
Not Required |
Input Type |
Non-Inverting |
Turn On Delay Time |
10 μs |
Switch Type |
General Purpose |
Output Current per Channel |
3.5A |
Nominal Input Voltage |
13V |
Turn-Off Delay Time |
15 μs |
Ratio - Input:Output |
1:1 |
Voltage - Load |
4.5V~36V |
Driver Number of Bits |
2 |
Fault Protection |
Current Limiting (Fixed), Open Load Detect, Over Temperature, Over Voltage |
Rds On (Typ) |
160m Ω (Max) |
Built-in Protections |
TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL; UNDER VOLTAGE |
Output Current Flow Direction |
SOURCE |
Height |
1.62mm |
Length |
5mm |
Width |
4mm |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
VND5160J-E Overview
As a result, it is packaged in the form of a Tube.It is included in the package PowerSSO-12.A Surface Mount mounting is used for the LED driving board.There is a General Purpose switch type associated with it.The temperature should be set to -40°C~150°C TJ to ensure reliable functioning.It is possible to use 2 outputs in the lighting driver.With a supply voltage of Not Required, the LED driving board operates.Voltage output is N-Channel volts at maximum.Currently, the LED driving board is equipped with Auto Restart, Status Flag features.The VND5160 family contains this object.It contains 12 terminations.During operation, the 12 pins are used.It contains 2 functions.This results in the maximum output current dropping to 5A to meet the operation criteria.The supply voltage of 13V is conducive to high efficiency.Surface Mount is mounted in the way of this LED driving board.A total of 12 pins are included in this LED driver.160mOhm resistance is present in the lighting driver.These electrical components are part of the VIPower? series.Self-contained in an econtainer with a capacity of Peripheral Drivers, this LED driver is self-contained.In order to maximize efficiency, the supply voltage should be set to 36V.
VND5160J-E Features
Supplied from 13V
Resistance of 160mOhm
VND5160J-E Applications
There are a lot of STMicroelectronics VND5160J-E Power Switches ICs applications.
- Hot Swap
- Portable GPS
- USB3.1 Power Delivery
- HDD, SSD
- Various applications equipped with buttons
- Wearable Devices
- Solid-State Drives
- USB Power Distribution
- Set-Top Boxes
- PC Card Hot Swap