VND5160JTR-E
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 6 months ago) |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 12-PowerLSOP (0.154, 3.90mm Width) |
| Number of Pins | 12 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Series | VIPower™ |
| Feature | Auto Restart, Status Flag |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 12 |
| ECCN Code | EAR99 |
| Resistance | 160mOhm |
| Subcategory | Peripheral Drivers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 2 |
| Supply Voltage | 13V |
| Terminal Pitch | 0.8mm |
| Base Part Number | VND5160 |
| Pin Count | 12 |
| Output Type | N-Channel |
| Max Output Current | 5A |
| Operating Supply Voltage | 13V |
| Voltage | 36V |
| Interface | On/Off |
| Nominal Supply Current | 3mA |
| Current | 5A |
| Output Configuration | High Side |
| Output Current | 5A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Turn On Delay Time | 10 μs |
| Switch Type | General Purpose |
| Output Current per Channel | 3.5A |
| Turn-Off Delay Time | 15 μs |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 4.5V~36V |
| Fault Protection | Current Limiting (Fixed), Open Load Detect, Over Temperature, Over Voltage |
| Number of Drivers | 2 |
| Rds On (Typ) | 160m Ω (Max) |
| Max Junction Temperature (Tj) | 150°C |
| Built-in Protections | TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL; UNDER VOLTAGE |
| On-State Resistance | 160mOhm |
| Height | 1.62mm |
| Length | 5mm |
| Width | 4mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
VND5160JTR-E Overview
As a result, it is packaged in the form of a Tape & Reel (TR).It is included with the 12-PowerLSOP (0.154, 3.90mm Width) package as well.This lighting drivere has a mounting type of Surface Mount.There is a General Purpose switch type associated with it.It is recommended that the temperature be set to -40°C~150°C TJ for reliable operation.The LED driving board operates with a supply voltage of Not Required.A maximum voltage of N-Channel volts is available from the output of this LED driver.It has a total of Auto Restart, Status Flag features.I believe it belongs to the VND5160 family.It consists of 12 terminations in total.In order to operate, 12 pins are used.Currently, the lighting driver has a total of 2 functions.This operation requires the maximum output current to be decreased to 5A.A supply voltage of 13V leads to high efficiency.As a result, it is mounted in the manner of Surface Mount.This LED driver is equipped with a total of 12 pins.It has 160mOhm resistance.A component of this type is included in the VIPower? series.The output current is set to 5A in this case.A self-contained container with a capacity of Peripheral Drivers contains this lighting driver.In order to optimize the efficiency of the supply voltage, it should be set to 13V.A total of 2 drivers are included in this part.
VND5160JTR-E Features
Supplied from 13V
Resistance of 160mOhm
VND5160JTR-E Applications
There are a lot of STMicroelectronics VND5160JTR-E Power Switches ICs applications.
- Handheld Devices
- Smartphone and PDA
- Portable Video Game Players
- Wireless Modem Data Cards
- Portable/Handheld Devices
- USB Protection
- Notebook and Tablet Computers
- Storage (HDDs, SSDs)
- Wireless Headsets
- Hot Swap
