banner_page

VND5E006ASP-E

N-Channel 0.8mm PMIC VIPower? Series VND5E006 16 Pin 13V 16-PowerBSOP (0.370, 9.40mm Width)


  • Manufacturer: STMicroelectronics
  • Nocochips NO: 761-VND5E006ASP-E
  • Package: 16-PowerBSOP (0.370, 9.40mm Width)
  • Datasheet: PDF
  • Stock: 728
  • Description: N-Channel 0.8mm PMIC VIPower? Series VND5E006 16 Pin 13V 16-PowerBSOP (0.370, 9.40mm Width) (Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Lifecycle Status ACTIVE (Last Updated: 8 months ago)
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 16-PowerBSOP (0.370, 9.40mm Width)
Number of Pins 16
Operating Temperature -40°C~150°C TJ
Packaging Tube
Series VIPower™
JESD-609 Code e3
Feature Auto Restart
Part Status Active
Moisture Sensitivity Level (MSL) 3 (168 Hours)
Number of Terminations 16
ECCN Code EAR99
Terminal Finish Matte Tin (Sn) - annealed
Subcategory Peripheral Drivers
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 250
Number of Functions 1
Supply Voltage 13V
Terminal Pitch 0.8mm
Reach Compliance Code not_compliant
Time@Peak Reflow Temperature-Max (s) NOT SPECIFIED
Base Part Number VND5E006
Pin Count 16
Number of Outputs 2
Qualification Status Not Qualified
Output Type N-Channel
Max Output Current 70A
Operating Supply Voltage 13V
Interface On/Off
Output Configuration High Side
Voltage - Supply (Vcc/Vdd) Not Required
Max Supply Current 6.5mA
Input Type Non-Inverting
Turn On Delay Time 35 μs
Switch Type General Purpose
Turn-Off Delay Time 20 μs
Ratio - Input:Output 1:1
Voltage - Load 4.5V~28V
Driver Number of Bits 2
Fault Protection Current Limiting (Fixed), Open Load Detect, Over Temperature, Over Voltage
Output Peak Current Limit-Nom 100A
Rds On (Typ) 5m Ω
Built-in Protections TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL; UNDER VOLTAGE
Output Current Flow Direction SINK
Height Seated (Max) 3.6mm
Length 9.4mm
Width 7.5mm
RoHS Status ROHS3 Compliant
Lead Free Lead Free

VND5E006ASP-E Overview


Tube is the way it's packaged.It is included with the 16-PowerBSOP (0.370, 9.40mm Width) package as well.In this case, the LED driving board is mounted as Surface Mount.This switch is of type General Purpose.In order to guarantee reliable performance, the temperature should be set to -40°C~150°C TJ.The LED driver has a total of 2 outputs.It uses a supply voltage of Not Required to operate.Voltage output is N-Channel volts at maximum.This LED driving board is equipped with Auto Restart features in order for it to be useful.The VND5E006 family contains this object.In total, there are 16 terminations.In order to operate, 16 pins are used.As far as functions are concerned, the lighting driver has 1.The maximum output current drops to 70A in order to meet the operation criteria.Supply voltages of 13V allow for high efficiency.The LED driving board is mounted in the way of Surface Mount.This LED driver is equipped with a total of 16 pins.This electrical component is included in the VIPower? series.The LED driver is self-contained in an econtainer with Peripheral Drivers capacity.It is recommended to set the supply voltage to 13V for optimum efficiency.There is a maximum current requirement of 6.5mA for its operation.

VND5E006ASP-E Features


Supplied from 13V

VND5E006ASP-E Applications


There are a lot of STMicroelectronics VND5E006ASP-E Power Switches ICs applications.

  • Wireless Headsets
  • PC Cards
  • Solid-State Drives
  • Gaming
  • Portable Video Game Players
  • Wearable Devices
  • Portable Devices
  • USB Power Distribution
  • Hot-Swap Systems
  • PC Card Hot Swap

Write a review

Note: HTML is not translated!
    Bad           Good