VND5E008AY-E
| Parameters | |
|---|---|
| Qualification Status | Not Qualified |
| Output Type | N-Channel |
| Max Output Current | 53A |
| Supply Voltage-Min (Vsup) | 4.5V |
| Interface | On/Off |
| Nominal Supply Current | 3.5mA |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 4.5V~28V |
| Driver Number of Bits | 2 |
| Fault Protection | Current Limiting (Fixed), Open Load Detect, Over Temperature, Over Voltage |
| Output Peak Current Limit-Nom | 76A |
| Rds On (Typ) | 8m Ω |
| Built-in Protections | TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL; UNDER VOLTAGE |
| Output Current Flow Direction | SINK |
| Length | 10.3mm |
| Width | 7.5mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 8 months ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 36-BFSOP (0.295, 7.50mm Width) Exposed Pad |
| Number of Pins | 36 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Series | Automotive, AEC-Q100, VIPOWER™ |
| JESD-609 Code | e3 |
| Feature | Auto Restart |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 36 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | Peripheral Drivers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 13V |
| Terminal Pitch | 0.5mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | VND5E008 |
| Pin Count | 36 |
| Number of Outputs | 2 |
VND5E008AY-E Overview
A Tube is used to package it.This package is included in 36-BFSOP (0.295, 7.50mm Width) Exposed Pad.The mounting type of the LED driver is Surface Mount.The switch type of this switch is General Purpose.The temperature should be set to -40°C~150°C TJ to ensure reliable functioning.There is a default setting of 2 for output.A supply voltage of Not Required is required for it to operate.It has a maximum output voltage of N-Channel volts.In terms of features, the LED driving board has Auto Restart.There is a VND5E008 family of things that it belongs to.It has a total of 36 terminations.The 36 pins are used for the operation of the system.Currently, the lighting driver has a total of 1 functions.It is necessary to reduce the maximum output current to 53A to meet the operation criteria.Supply voltages of 13V allow for high efficiency.The lighting driver is mounted in the way of Surface Mount.A total of 36 pins are included in this LED driver.These electrical components are part of the Automotive, AEC-Q100, VIPOWER? series.A container with a capacity of Peripheral Drivers contains this self-contained lighting driver.The supply voltage (Vsup) should be kept above 4.5V for normal operation.
VND5E008AY-E Features
Supplied from 13V
VND5E008AY-E Applications
There are a lot of STMicroelectronics VND5E008AY-E Power Switches ICs applications.
- PC Cards
- Portable/Handheld Devices
- Solid-State Drives
- USB Protection
- Hot-Swap Systems
- Mobile Communication Devices
- Portable Video Game Players
- Telecom and Network Systems
- Hot Swaps
- PC Card Hot Swap
