VND5E008AYTR-E
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 7 months ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 36-BFSOP (0.295, 7.50mm Width) Exposed Pad |
| Number of Pins | 36 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Series | Automotive, AEC-Q100, VIPOWER™ |
| JESD-609 Code | e3 |
| Feature | Auto Restart |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 36 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | Peripheral Drivers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 13V |
| Terminal Pitch | 0.5mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | VND5E008 |
| Pin Count | 36 |
| Number of Outputs | 2 |
| Qualification Status | Not Qualified |
| Output Type | N-Channel |
| Max Output Current | 53A |
| Supply Voltage-Min (Vsup) | 4.5V |
| Interface | On/Off |
| Nominal Supply Current | 3.5mA |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 4.5V~28V |
| Driver Number of Bits | 2 |
| Fault Protection | Current Limiting (Fixed), Open Load Detect, Over Temperature, Over Voltage |
| Output Peak Current Limit-Nom | 76A |
| Rds On (Typ) | 8m Ω |
| Built-in Protections | TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL; UNDER VOLTAGE |
| Output Current Flow Direction | SINK |
| Length | 10.3mm |
| Width | 7.5mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
VND5E008AYTR-E Overview
As you can see, it's packaged in the way of a Tape & Reel (TR).The 36-BFSOP (0.295, 7.50mm Width) Exposed Pad package contains it.A Surface Mount mounting is used for the LED driving board.There is a switch type of General Purpose.To ensure reliable performance, the temperature should be set to -40°C~150°C TJ.It is possible to use 2 outputs in the lighting driver.The LED driving board operates with a supply voltage of Not Required.A maximum output voltage of N-Channel volts can be achieved by this LED driver.It has a total of Auto Restart features.It belongs to the VND5E008 family.It consists of 36 terminations in total.In order to operate, 36 pins are used.There are 1 functions of the LED driver.The maximum output current drops to 53A in order to meet the operation criteria.High efficiency is possible when the supply voltage is set to 13V.The lighting driver is mounted in the direction of Surface Mount.It is equipped with a total of 36 pins.This electrical component can be found in the Automotive, AEC-Q100, VIPOWER? series.A self-contained LED driver with a capacity of Peripheral Drivers is contained in an econtainer.To maintain a normal operation, the supply voltage (Vsup) must be maintained above 4.5V.
VND5E008AYTR-E Features
Supplied from 13V
VND5E008AYTR-E Applications
There are a lot of STMicroelectronics VND5E008AYTR-E Power Switches ICs applications.
- Low Voltage I/O System Power
- Hot Swaps
- Portable/Handheld Devices
- Notebook and Tablet Computers
- USB Power Distribution
- PDAs
- HDD and SSD
- PC Cards
- USB Power Distribution
- Portable Music Players
