VND5E012AYTR-E
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 7 months ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | PowerSSO-36 Exposed Bottom Pad |
| Number of Pins | 36 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Series | Automotive, AEC-Q100, VIPOWER™ |
| JESD-609 Code | e3 |
| Feature | Auto Restart |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 36 |
| ECCN Code | EAR99 |
| Resistance | 11mOhm |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 0.5mm |
| Base Part Number | VND5E012 |
| Pin Count | 36 |
| Number of Outputs | 2 |
| Output Type | N-Channel |
| Max Output Current | 74A |
| Operating Supply Voltage | 13V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Interface | On/Off |
| Analog IC - Other Type | ANALOG CIRCUIT |
| Nominal Supply Current | 3.5mA |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Max Supply Current | 6.5mA |
| Input Type | Non-Inverting |
| Turn On Delay Time | 30 μs |
| Switch Type | General Purpose |
| Output Current per Channel | 52A |
| Turn-Off Delay Time | 20 μs |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 4.5V~28V |
| Fault Protection | Current Limiting (Fixed), Over Temperature, Over Voltage |
| Rds On (Typ) | 11m Ω |
| Length | 10.3mm |
| Width | 7.5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
VND5E012AYTR-E Overview
It's?packaged?in?the way?of?a?Tape & Reel (TR).This file is included in package PowerSSO-36 Exposed Bottom Pad.This lighting drivere has a mounting type of Surface Mount.The switch type is General Purpose.The temperature should be set to -40°C~150°C TJ to ensure reliable functioning.The LED driver is equipped with 2 outputs.Operation is based on a supply voltage of Not Required.Voltage output is N-Channel volts at maximum.A lighting driver with Auto Restart features is available.The VND5E012 family contains this object.As a result, there are 36 terminations.For operation, we use the 36 pins.There are 1 functions of the LED driver.To meet the operation criteria, the maximum output current drops to 74A.The LED driving board is mounted in the way of Surface Mount.A total of 36 pins are present on it.11mOhm resistance is present in the lighting driver.It is part of the Automotive, AEC-Q100, VIPOWER? series.In order for the lighting driver to operate normally, the supply voltage (Vsup) should be maintained above 4.5V.In this case, the analog IC in this gadget is ANALOG CIRCUIT.It is recommended that the supply voltage be set at 13V in order to achieve maximum efficiency.A maximum current requirement of 6.5mA is required for its operation.
VND5E012AYTR-E Features
Resistance of 11mOhm
VND5E012AYTR-E Applications
There are a lot of STMicroelectronics VND5E012AYTR-E Power Switches ICs applications.
- HDD and SSD
- Storage (HDDs, SSDs)
- Portable Devices
- Low Voltage I/O System Power
- USB Protection
- Solid-State Drives
- Portable GPS
- Hard Disk Drives
- PC Cards
- Wireless Modem Data Cards
