VND5E012MY-E
| Parameters | |
|---|---|
| Max Supply Current | 6.5mA |
| Input Type | Non-Inverting |
| Turn On Delay Time | 30 μs |
| Switch Type | General Purpose |
| Turn-Off Delay Time | 20 μs |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 4.5V~28V |
| Driver Number of Bits | 2 |
| Fault Protection | Current Limiting (Fixed), Over Temperature, Over Voltage |
| Screening Level | AEC-Q100 |
| Output Peak Current Limit-Nom | 74A |
| Rds On (Typ) | 11m Ω |
| Built-in Protections | TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL; UNDER VOLTAGE |
| Output Current Flow Direction | SINK |
| Length | 10.3mm |
| Width | 7.5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lifecycle Status | ACTIVE (Last Updated: 8 months ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | PowerSSO-36 Exposed Bottom Pad |
| Number of Pins | 36 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Series | VIPower™ |
| JESD-609 Code | e3 |
| Feature | Auto Restart |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 36 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | Peripheral Drivers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 13V |
| Terminal Pitch | 0.5mm |
| Base Part Number | VND5E012 |
| Pin Count | 36 |
| Number of Outputs | 2 |
| Output Type | N-Channel |
| Max Output Current | 52A |
| Operating Supply Voltage | 13V |
| Interface | On/Off |
| Nominal Supply Current | 3.5mA |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
VND5E012MY-E Overview
A Tube is used to package it.In the PowerSSO-36 Exposed Bottom Pad package, it is included.This LED driving board is mounted using the mounting type Surface Mount.A General Purpose switch type is owned by it.It is recommended that the temperature be set to -40°C~150°C TJ for reliable operation.There is a default setting of 2 for output.A supply voltage of Not Required is required for it to operate.It produces a maximum output voltage of N-Channel volts at its maximum output.There are Auto Restart features available on the LED driving board.There is a VND5E012 family of things that it belongs to.There are 36 terminations in it.The 36 pins are used to operate the LED driver.As far as the lighting driver is concerned, there are 1 functions.The maximum output current must drop to 52A to meet the operation criteria.Supply voltages of 13V allow for high efficiency.In this case, it is mounted in the way of Surface Mount.The LED driver has a total of 36 pins.These electrical components are part of the VIPower? series.Self-contained LED driver with Peripheral Drivers capacity in an econtainer.The supply voltage should be set at 13V for best efficiency.This system has a maximum current requirement of 6.5mA.
VND5E012MY-E Features
Supplied from 13V
VND5E012MY-E Applications
There are a lot of STMicroelectronics VND5E012MY-E Power Switches ICs applications.
- HDD, SSD
- HDD and SSD
- Portable Video Game Players
- Portable Devices
- PC Cards
- Smart Phones, Feature Phones
- Smartphone and PDA
- USB Power Distribution
- Portable Music Players
- Wireless Modem Data Cards
