VND5E012MYTR-E
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 7 months ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 36-BFSOP (0.295, 7.50mm Width) Exposed Pad |
| Number of Pins | 36 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Series | Automotive, AEC-Q100, VIPOWER™ |
| JESD-609 Code | e3 |
| Feature | Auto Restart |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 36 |
| ECCN Code | EAR99 |
| Resistance | 11mOhm |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | Peripheral Drivers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 13V |
| Terminal Pitch | 0.5mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | VND5E012 |
| Pin Count | 36 |
| Number of Outputs | 2 |
| Qualification Status | Not Qualified |
| Output Type | N-Channel |
| Max Output Current | 74A |
| Supply Voltage-Min (Vsup) | 4.5V |
| Interface | On/Off |
| Nominal Supply Current | 3.5mA |
| Output Configuration | High Side |
| Output Current | 74A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Max Supply Current | 6.5mA |
| Input Type | Non-Inverting |
| Turn On Delay Time | 30 μs |
| Switch Type | General Purpose |
| Output Current per Channel | 52A |
| Turn-Off Delay Time | 20 μs |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 4.5V~28V |
| Driver Number of Bits | 2 |
| Fault Protection | Current Limiting (Fixed), Over Temperature, Over Voltage |
| Output Peak Current Limit-Nom | 74A |
| Rds On (Typ) | 11m Ω |
| Built-in Protections | TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL; UNDER VOLTAGE |
| Length | 10.3mm |
| Width | 7.5mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
VND5E012MYTR-E Overview
It's?packaged?in?the way?of?a?Tape & Reel (TR).The 36-BFSOP (0.295, 7.50mm Width) Exposed Pad package contains it.This LED driving board is mounted using the mounting type Surface Mount.General Purpose is the switch type it owns.It is best to set the temperature to -40°C~150°C TJ to ensure reliable operation.The lighting driver is equipped with 2 outputs that can be used.It uses a supply voltage of Not Required to operate.It produces a maximum output voltage of N-Channel volts at its maximum output.As far as features are concerned, the LED driving board has Auto Restart.It belongs to the VND5E012 family.A total of 36 terminations can be found in it.During operation, the 36 pins are used.The LED driving board has a total of 1 functions.It is necessary to reduce the maximum output current to 74A to meet the operation criteria.High efficiency is possible at 13V supply voltage.It is mounted in the way of Surface Mount.As a result, it has a total of 36 pins.In this LED driving board, there is 11mOhm resistance.This electrical component can be found in the Automotive, AEC-Q100, VIPOWER? series.It is set to 74A in this case.The LED driver is self-contained in an econtainer with Peripheral Drivers capacity.In order for this lighting driver to operate normally, the supply voltage (Vsup) should remain above 4.5V.6.5mA is the maximum current required to operate it.
VND5E012MYTR-E Features
Supplied from 13V
Resistance of 11mOhm
VND5E012MYTR-E Applications
There are a lot of STMicroelectronics VND5E012MYTR-E Power Switches ICs applications.
- Hard Disk Drives
- Solid State Drivers
- Set-top-box
- Storage (HDDs, SSDs)
- Wireless Headsets
- Portable Video Game Players
- Smartphone and PDA
- Mobile Communication Devices
- Hot Swaps
- Handheld Devices
