VND5E025AK-E
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 7 months ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 24-PowerBSOP (0.295, 7.50mm Width) |
| Number of Pins | 24 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Series | VIPower™ |
| Feature | Auto Restart |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Resistance | 25mOhm |
| Subcategory | Peripheral Drivers |
| Technology | CMOS |
| Terminal Position | SINGLE |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 13V |
| Terminal Pitch | 0.8mm |
| Base Part Number | VND5E025 |
| Pin Count | 24 |
| Number of Outputs | 2 |
| Output Type | N-Channel |
| Max Output Current | 60A |
| Operating Supply Voltage | 13V |
| Interface | On/Off |
| Nominal Supply Current | 6mA |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Max Supply Current | 6mA |
| Input Type | Non-Inverting |
| Turn On Delay Time | 20 ms |
| Switch Type | General Purpose |
| Output Current per Channel | 43A |
| Turn-Off Delay Time | 40 ms |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 4.5V~28V |
| Driver Number of Bits | 2 |
| Fault Protection | Current Limiting (Fixed), Open Load Detect, Over Temperature, Over Voltage |
| Rds On (Typ) | 25m Ω (Max) |
| Built-in Protections | TRANSIENT; OVER CURRENT; THERMAL; UNDER VOLTAGE |
| Output Current Flow Direction | SOURCE |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
VND5E025AK-E Overview
It is packaged in the form of a Tube.It's included in the 24-PowerBSOP (0.295, 7.50mm Width) package.In this case, the LED driving board is mounted as Surface Mount.It owns General Purpose switch type.Keeping the temperature at -40°C~150°C TJ ensures reliable operation.There are 2 outputs available on this lighting driver.Operation is based on a supply voltage of Not Required.There is a maximum output voltage of N-Channel volts.It is equipped with Auto Restart features.It is a member of the VND5E025 family.There are 24 terminations in it.24 pins are used for operation.As far as functions are concerned, the lighting driver has 1.The maximum output current drops to 60A in order to meet the operation criteria.As long as the supply voltage is 13V, high efficiency can be achieved.This lighting driver is mounted in the way of Surface Mount.The LED driving board is equipped with a total of 24 pins.25mOhm is the resistance of the lighting driver.The VIPower? series includes this electrical component.A self-contained econtainer holding Peripheral Drivers capacity contains this lighting driver.When using this LED driving board, it is recommended that the supply voltage is set to 13V.For its operation, a current of 6mA is required.
VND5E025AK-E Features
Supplied from 13V
Resistance of 25mOhm
VND5E025AK-E Applications
There are a lot of STMicroelectronics VND5E025AK-E Power Switches ICs applications.
- Portable Devices
- Set-top-box
- HDD and SSD
- HDD, SSD
- Wearable Devices
- PDAs
- USB Power Distribution
- Storage (HDDs, SSDs)
- Wireless/Networking Cards
- Solid State Drivers
