VND5E025LK-E
| Parameters | |
|---|---|
| Subcategory | Peripheral Drivers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.8mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | VND5E025 |
| Pin Count | 24 |
| Number of Outputs | 2 |
| Qualification Status | Not Qualified |
| Output Type | N-Channel |
| Max Output Current | 60A |
| Operating Supply Voltage | 13V |
| Interface | On/Off |
| Current - Output (Max) | 30A |
| Nominal Supply Current | 3mA |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Max Supply Current | 6mA |
| Input Type | Non-Inverting |
| Turn On Delay Time | 20 μs |
| Switch Type | General Purpose |
| Output Current per Channel | 43A |
| Turn-Off Delay Time | 40 μs |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 4.5V~28V |
| Driver Number of Bits | 2 |
| Fault Protection | Current Limiting (Fixed), Open Load Detect, Over Temperature, Over Voltage |
| Rds On (Typ) | 25m Ω (Max) |
| Output Current Flow Direction | SINK |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 8 months ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 24-PowerBSOP (0.295, 7.50mm Width) |
| Number of Pins | 24 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Series | VIPower™ |
| JESD-609 Code | e3 |
| Feature | Auto Restart |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Resistance | 25mOhm |
| Terminal Finish | Matte Tin (Sn) - annealed |
VND5E025LK-E Overview
Tube is how it's packaged.Package 24-PowerBSOP (0.295, 7.50mm Width) contains it.The LED driver is mounted as Surface Mount.The switch type is General Purpose.To ensure reliable operation, the temperature should be set to -40°C~150°C TJ.The lighting driver has a total of 2 outputs that are available for use.The LED driving board is powered by a voltage of Not Required.The maximum output voltage is N-Channel volts.The lighting driver has Auto Restart features.There is a VND5E025 family of things that it belongs to.As a result, there are 24 terminations.24 pins are used for operation.In this case, the LED driving board can produce only 30AV as its maximum output.In order to meet the operation criteria, the maximum output current drops to 60A.Surface Mount is mounted in the way.The LED driving board is equipped with a total of 24 pins.There is 25mOhm resistance on the LED driver.It is included in the VIPower? series.The LED driver is self-contained in an econtainer with Peripheral Drivers capacity.In order to maximize efficiency, the supply voltage should be set to 13V.The maximum current required for its operation is 6mA.
VND5E025LK-E Features
Resistance of 25mOhm
VND5E025LK-E Applications
There are a lot of STMicroelectronics VND5E025LK-E Power Switches ICs applications.
- Notebook PC
- Portable GPS
- Smartphone and PDA
- Solid-State Drives
- Wireless Headsets
- Notebook and Tablet Computers
- Storage Drives
- USB3.1 Power Delivery
- HDD and SSD
- Portable Music Players
