VND5E025MK-E
| Parameters | |
|---|---|
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Max Supply Current | 6mA |
| Input Type | Non-Inverting |
| Turn On Delay Time | 20 μs |
| Switch Type | General Purpose |
| Output Current per Channel | 43A |
| Turn-Off Delay Time | 40 μs |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 4.5V~28V |
| Fault Protection | Current Limiting (Fixed), Over Temperature, Over Voltage |
| Number of Drivers | 2 |
| Rds On (Typ) | 25mOhm (Max) |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 8 months ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 24-PowerBSOP (0.295, 7.50mm Width) |
| Number of Pins | 24 |
| Supplier Device Package | PowerSSO-24 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Series | VIPower™ |
| Feature | Auto Restart |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Resistance | 25mOhm |
| Max Operating Temperature | 150°C |
| Min Operating Temperature | -40°C |
| Base Part Number | VND5E025 |
| Number of Outputs | 2 |
| Output Type | N-Channel |
| Max Output Current | 60A |
| Operating Supply Voltage | 13V |
| Interface | On/Off |
| Max Supply Voltage | 28V |
| Min Supply Voltage | 4.5V |
| Current - Output (Max) | 43A |
| Nominal Supply Current | 3mA |
| Output Configuration | High Side |
VND5E025MK-E Overview
The package is in the form of a Tube.It is included in the package 24-PowerBSOP (0.295, 7.50mm Width).In this case, the LED driving board is mounted as Surface Mount.This switch is of type General Purpose.To ensure reliable operation, set the temperature to -40°C~150°C TJ.The lighting driver is equipped with 2 outputs that can be used.The LED driving board is powered by a voltage of Not Required.It has a maximum output voltage of N-Channel volts.It has a total of Auto Restart features.It is part of the VND5E025 family of LED drivers.In order to operate, 24 pins are used.Its maximum output voltage is 43AV.The maximum output current must drop to 60A to meet the operation criteria.Surface Mount is mounted in the way of this LED driving board.Lighting drivers with 25mOhm resistance are used.This electrical component is included in the VIPower? series.A supply voltage of 13V is recommended for maximum efficiency.It is suitable for stable operation to operate at a maximum temperature of 150°C°C.Ensure reliability by operating at a minimum temperature of -40°C degrees Celsius.It operates at a maximum current of 6mA.In addition to 28VV, it can handle other voltages as well.It can operate at low supply voltages, such as 4.5V volts.2 drivers are available for the part.
VND5E025MK-E Features
Resistance of 25mOhm
VND5E025MK-E Applications
There are a lot of STMicroelectronics VND5E025MK-E Power Switches ICs applications.
- Portable/Handheld Devices
- Hard Disk Drives
- Hot Swap
- Portable Music Players
- Wearable Devices
- Handheld Devices
- Notebook PC
- Low Voltage I/O System Power
- Portable Video Game Players
- Set-Top Boxes
