VND5E050AJ-E
| Parameters | |
|---|---|
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 13V |
| Terminal Pitch | 0.8mm |
| Base Part Number | VND5E050 |
| Pin Count | 12 |
| Number of Outputs | 2 |
| Output Type | N-Channel |
| Max Output Current | 27A |
| Operating Supply Voltage | 13V |
| Interface | On/Off |
| Current - Output (Max) | 19A |
| Nominal Supply Current | 6mA |
| Output Configuration | High Side |
| Output Current | 27A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Max Supply Current | 6mA |
| Input Type | Non-Inverting |
| Turn On Delay Time | 20 μs |
| Switch Type | General Purpose |
| Turn-Off Delay Time | 45 μs |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 4.5V~28V |
| Driver Number of Bits | 2 |
| Fault Protection | Current Limiting (Fixed), Open Load Detect, Over Temperature, Over Voltage |
| Rds On (Typ) | 50m Ω (Max) |
| Built-in Protections | TRANSIENT; OVER CURRENT; THERMAL; UNDER VOLTAGE |
| Length | 4.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | PowerSSO-12 |
| Number of Pins | 12 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Series | VIPower™ |
| JESD-609 Code | e3 |
| Feature | Auto Restart |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 12 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin (Sn) |
| Subcategory | Peripheral Drivers |
| Technology | CMOS |
| Terminal Position | DUAL |
VND5E050AJ-E Overview
It's?packaged?in?the way?of?a?Tube.This package is included in PowerSSO-12.A Surface Mount mounting is used for the LED driving board.There is a General Purpose switch type associated with it.To ensure reliable performance, the temperature should be set to -40°C~150°C TJ.There are 2 outputs available on this lighting driver.The LED driving board operates at Not Required volts.The maximum output voltage is N-Channel volts.There are Auto Restart features available on the LED driving board.It comes under the family of VND5E050.A total of 12 terminations have been found in it.During operation, the 12 pins are used.As far as functions are concerned, the lighting driver has 1.From the lighting driver, there is a maximum output of 19AV.In order to meet the operation criteria, the maximum output current drops to 27A.Supply voltages of 13V allow for high efficiency.It is mounted in the way of Surface Mount.It is equipped with a total of 12 pins.It is part of the VIPower? series.In this case, the output current is set to 27A.It is self-contained in an econtainer with a capacity of Peripheral Drivers.In order to optimize the efficiency of the supply voltage, it should be set to 13V.6mA is the maximum current required to operate it.
VND5E050AJ-E Features
Supplied from 13V
VND5E050AJ-E Applications
There are a lot of STMicroelectronics VND5E050AJ-E Power Switches ICs applications.
- Notebook and Tablet Computers
- Portable GPS Device
- Hard Disk Drives
- PC Cards
- Hot Swap
- Wireless/Networking Cards
- USB Power Distribution
- USB Power Distribution
- HDD and SSD
- Gaming
