VND5E050AK-E
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 24-PowerBSOP (0.295, 7.50mm Width) |
| Number of Pins | 24 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Series | VIPower™ |
| JESD-609 Code | e3 |
| Feature | Auto Restart |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Resistance | 50mOhm |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | Peripheral Drivers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 13V |
| Terminal Pitch | 0.8mm |
| Base Part Number | VND5E050 |
| Pin Count | 24 |
| Number of Outputs | 2 |
| Output Type | N-Channel |
| Max Output Current | 27A |
| Operating Supply Voltage | 13V |
| Interface | On/Off |
| Nominal Supply Current | 3mA |
| Output Configuration | High Side |
| Output Current | 27A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Max Supply Current | 6mA |
| Input Type | Non-Inverting |
| Turn On Delay Time | 20 μs |
| Switch Type | General Purpose |
| Output Current per Channel | 19A |
| Turn-Off Delay Time | 45 μs |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 4.5V~28V |
| Driver Number of Bits | 2 |
| Fault Protection | Current Limiting (Fixed), Open Load Detect, Over Temperature, Over Voltage |
| Rds On (Typ) | 50m Ω (Max) |
| Built-in Protections | TRANSIENT; OVER CURRENT; THERMAL; UNDER VOLTAGE |
| Length | 10.3mm |
| Width | 7.5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
VND5E050AK-E Overview
As a result, it is packaged in the form of a Tube.It is included with the 24-PowerBSOP (0.295, 7.50mm Width) package as well.A Surface Mount mounting is used for the LED driving board.There is a switch type of General Purpose.To ensure reliable performance, the temperature should be set to -40°C~150°C TJ.It is possible to use 2 outputs in the lighting driver.The LED driving board operates with a supply voltage of Not Required.Voltage output is N-Channel volts at maximum.There are Auto Restart features available on the LED driving board.There is a VND5E050 family of things that it belongs to.It contains 24 terminations.During operation, the 24 pins are used.It has 1 functions.The maximum output current drops to 27A in order to meet the operation criteria.Using a voltage of 13V allows for high efficiency.It is positioned in the direction of Surface Mount.A total of 24 pins are present on it.There is 50mOhm resistance on the LED driver.This electrical component is included in the VIPower? series.This results in a 27A output current.The LED driver is self-contained in an econtainer with Peripheral Drivers capacity.In order to maximize efficiency, the supply voltage should be set at 13V.There is a maximum current requirement of 6mA for its operation.
VND5E050AK-E Features
Supplied from 13V
Resistance of 50mOhm
VND5E050AK-E Applications
There are a lot of STMicroelectronics VND5E050AK-E Power Switches ICs applications.
- Wireless/Networking Cards
- Various applications equipped with buttons
- Set-Top Boxes
- PC Card Hot Swap
- Hard Disk Drives
- Set-top-box
- Low Voltage I/O System Power
- USB Power Distribution
- Telecom and Network Systems
- Solid State Drivers
