VND5E050AKTR-E
| Parameters | |
|---|---|
| Operating Supply Voltage | 13V |
| Interface | On/Off |
| Nominal Supply Current | 3mA |
| Output Configuration | High Side |
| Output Current | 27A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Max Supply Current | 6mA |
| Input Type | Non-Inverting |
| Turn On Delay Time | 20 μs |
| Switch Type | General Purpose |
| Output Current per Channel | 19A |
| Turn-Off Delay Time | 45 μs |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 4.5V~28V |
| Driver Number of Bits | 2 |
| Fault Protection | Current Limiting (Fixed), Open Load Detect, Over Temperature, Over Voltage |
| Rds On (Typ) | 50m Ω (Max) |
| Built-in Protections | TRANSIENT; OVER CURRENT; THERMAL; UNDER VOLTAGE |
| Length | 10.3mm |
| Width | 7.5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 24-PowerBSOP (0.295, 7.50mm Width) |
| Number of Pins | 24 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Series | VIPower™ |
| JESD-609 Code | e3 |
| Feature | Auto Restart |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Resistance | 50mOhm |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | Peripheral Drivers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 13V |
| Terminal Pitch | 0.8mm |
| Base Part Number | VND5E050 |
| Pin Count | 24 |
| Number of Outputs | 2 |
| Output Type | N-Channel |
| Max Output Current | 27A |
VND5E050AKTR-E Overview
The package is in the form of a Tape & Reel (TR).The 24-PowerBSOP (0.295, 7.50mm Width) package contains it.The lighting driver has the mounting type Surface Mount.General Purpose is the type of switch owned by it.To ensure reliable performance, the temperature should be set to -40°C~150°C TJ.The lighting driver is equipped with 2 outputs that can be used.The LED driving board is powered by a voltage of Not Required.A maximum output voltage of N-Channel volts can be obtained with this LED driver.In terms of features, the LED driving board has Auto Restart.This object belongs to the VND5E050 family.A total of 24 terminations can be found in it.For operation, 24 pins are used.There are 1 functions of the LED driver.It is necessary to reduce the maximum output current to 27A to meet the operation criteria.With a supply voltage of 13V, high efficiency is possible.The lighting driver is mounted in the way of Surface Mount.This LED driver is equipped with a total of 24 pins.The LED driver has 50mOhm resistance.There is an electrical component included in the VIPower? series.This results in a 27A output current.A self-contained LED driver with a capacity of Peripheral Drivers is contained in an econtainer.Optimal efficiency requires a voltage of 13V.For its operation, a current of 6mA is required.
VND5E050AKTR-E Features
Supplied from 13V
Resistance of 50mOhm
VND5E050AKTR-E Applications
There are a lot of STMicroelectronics VND5E050AKTR-E Power Switches ICs applications.
- Hard Disk Drives
- Portable Music Players
- USB3.1 Power Delivery
- Storage (HDDs, SSDs)
- Low Voltage I/O System Power
- Hot Swap
- Wireless Modem Data Cards
- Handheld Devices
- Smartphone and PDA
- Portable GPS
